Where the width of the examination surface is less than 36 inches (915 mm), the clearance depth shall extend the full width of the equipment....
Search Results "Counter Depth"
-
M301.4.1 Clearance in Base
-
Is additional latch side clearance required on the push side of doors with a forward approach when either a latch or closer (but not both) is provided?
This is also true for the additional depth required for hinge approaches on the push side when both a closer and latch is provided....
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
- The American Society on Aging
- Caroma® USA Invisi Series II Cube Wall Hung Water Closet
- Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
-
Dining Surface and Work Surface
Some commenters considered the term too limiting and questioned whether it would apply, as they felt it should, to surfaces used forpurposes not necessarily considered "work," such as counters...
- FBD Partnership Four Flavors Frozen Beverage Dispenser
- Just Manufacturing Ledgemount Non-Swivel Gooseneck Concealed Mixing Faucet
-
Guidelines for Requirement 5
obstruction, is 44 inches for forward approach (as was proposed in the Option One guidelines), or 46 inches for side approach, provided that the obstruction is no more than 24 inches in depth...
-
Spas
However, footrests or retractable leg supports are encouraged, especially on lifts used in larger spas, where the water depth is 34 inches or more and there is sufficient space....
-
5.2.2 Transfer Surface Size Recommendations for M302
The transfer surface size has two components: width and depth. (See Figure 5.2.1.1) NPRM Proposed Provision: M302.2.2 Size....
-
610.2 Bathtub Seats
The depth of a removable in-tub seat shall be 15 inches (380 mm) minimum and 16 inches (405 mm) maximum. The seat shall be capable of secure placement....
-
11B-610.2 Bathtub seats
The depth of a removable in-tub seat shall be 15 inches (381 mm) minimum and 16 inches (406 mm) maximum. The seat shall be capable of secure placement....
-
226 Dining Surfaces and Work Surfaces
surfaces covered do not include those surfaces used by employees, since elements of work stations are not required to comply with these guidelines (226.1) exempt sales and service counters...
-
D. Reach Range
[ADA Stds. 5.5] Yes __ No __ N/A __ Comments: ________________________________________ ...operational controls higher than 46" if they are set back 10"-24" from the edge of the counter...
-
Single-User Toilet Rooms: No Side Transfer Space
Lavatory placement is limited by the rear gab bar, which should not overlap counter surfaces....
-
2.3
with lines of sight comparable to those for members of the general public, (b) including wheelchair spaces as an integral part of the fixed seating plan, (c) providing the appropriate depth...
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
The MDE Advisory Committee recommended allowing obstructions into the knee and toe clear space, up to a height and depth that still permits the footrests of wheelchairs to pass over it....
- FBD Partnership Two Flavors Frozen Beverage Dispenser
- FBD Partnership Three Flavors Frozen Beverage Dispenser