The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
Search Results "Bus Loading Zone"
Filters
Commonly Searched Documents
-
1002.5.2 Transfer Height
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
502.3.3 Marking
The access aisle must be striped diagonally to designate it as a no-parking zone. Advisory 502.3.3 Marking....
-
2. Priority Guidelines for Removal of Access Barriers
transportation corridors; (3) hospitals, medical facilities, assisted living facilities, and other similar facilities; (4) places of public accommodation such as commercial and business zones...
-
12185(d) Deadline
section 12186(a)(2)(B) of this title on or before the applicable deadlines specified in section 12186(a)(2)(B) of this title will result in a significant reduction in intercity over-the-road bus...
-
§ 37.33(a)
Public airports which operate fixed route transportation systems are subject to the requirements of this part for commuter bus service operated by public entities....
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
STRUCTURAL IMPRACTICABILITY
Changes having little likelihood of being accomplished without removing or altering a load-bearing structural member and/or incurring an increased cost of 50 percent or more of the value...
-
Fares
The system operates the same regardless of whether the paratransit trip is being provided in place of a bus or a rail trip the user cannot make on the fixed route system....
-
§382.99(a)
carrier, you must negotiate in good faith with the airport operator of each U.S. airport described in §382.95(b) to ensure the provision of lifts for boarding and deplaning where level-entry loading...
-
4.1.3(8)(a)(i)
Public entrances are any entrances that are not loading or service entrances....
-
Summary of Significant Changes
: Large transit entities are required under the 2016 Non-Rail Vehicle Guidelines to provide automated stop and route announcement systems on all large vehicles operating in fixed route bus...
-
Section 37.105 Equivalent Service Standard
Engaged” System type Vehicle type/capacity Requirement Fixed route All new vehicles except auto, van with less than 8 capacity, or over the road bus...
-
Additional Protections from Discrimination
, to gain the same benefit, or to reach the same level of achievement in the most integrated setting appropriate to a particular student’s needs.117 For example, a school district’s bus...
-
Alterations
Passenger Loading Zones Sections 209 and 503 Sales and Service Sections 227 and 904 specifically cover sales and service areas, such as check-out aisles and sales and service counters...
-
T213 Seats
Comments were received from a bus manufacturer and a transit operator seeking clarification whether flip up seats used in wheelchair spaces could also be designated as priority seats....
-
1009.2.4 Seat Height
of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
About the Author
He worked as the east zone structural engineer for the Eastern Region and as a civil engineer for the Ashley and Tongass National Forests before coming to MTDC....
-
11B-217.4.7 Transportation facilities
In transportation facilities, in addition to the requirements of Sections 11B-217.4.1 through 11B-217.4.4, where at least one public pay telephone serves a particular entrance to a bus or...
-
1. Location
Remember, walkways include areas where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people...
-
Subtitle B: Public Transportation
purchased vehicles, make good faith efforts to purchase or lease accessible used buses, remanufacture buses in an accessible manner, and, provide paratransit where they operate fixed-route bus...