The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
Search Results "Bus Loading Zone"
-
1002.6.2 Transfer Height
-
12185(d) Deadline
section 12186(a)(2)(B) of this title on or before the applicable deadlines specified in section 12186(a)(2)(B) of this title will result in a significant reduction in intercity over-the-road bus...
-
§ 37.33(a)
Public airports which operate fixed route transportation systems are subject to the requirements of this part for commuter bus service operated by public entities....
-
2. Priority Guidelines for Removal of Access Barriers
transportation corridors; (3) hospitals, medical facilities, assisted living facilities, and other similar facilities; (4) places of public accommodation such as commercial and business zones...
-
502.3.3 Marking
The access aisle must be striped diagonally to designate it as a no-parking zone. Advisory 502.3.3 Marking....
-
American Specialties Turbo-Tuff™ Recessed Mounted Hand Dryer 0134
thermostat Owner-adjustable air speed and air temperature On/off heating options Dryer automatically shuts off after time-out when user removes hands from sensor zone...
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
STRUCTURAL IMPRACTICABILITY
Changes having little likelihood of being accomplished without removing or altering a load-bearing structural member and/or incurring an increased cost of 50 percent or more of the value...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
Design parameter considerations
museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust for narrow-zone...
-
III-7.4300 Parking
If valet parking is provided, there must be an accessible passenger loading zone....
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
§382.99(a)
carrier, you must negotiate in good faith with the airport operator of each U.S. airport described in §382.95(b) to ensure the provision of lifts for boarding and deplaning where level-entry loading...
-
4.1.3(8)(a)(i)
Public entrances are any entrances that are not loading or service entrances....
-
Fares
The system operates the same regardless of whether the paratransit trip is being provided in place of a bus or a rail trip the user cannot make on the fixed route system....
-
Summary of Significant Changes
: Large transit entities are required under the 2016 Non-Rail Vehicle Guidelines to provide automated stop and route announcement systems on all large vehicles operating in fixed route bus...
-
Section 37.105 Equivalent Service Standard
Engaged” System type Vehicle type/capacity Requirement Fixed route All new vehicles except auto, van with less than 8 capacity, or over the road bus...
-
11B-217.4.7 Transportation facilities
In transportation facilities, in addition to the requirements of Sections 11B-217.4.1 through 11B-217.4.4, where at least one public pay telephone serves a particular entrance to a bus or...
-
1. Location
Remember, walkways include areas where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people...
-
Subtitle B: Public Transportation
purchased vehicles, make good faith efforts to purchase or lease accessible used buses, remanufacture buses in an accessible manner, and, provide paratransit where they operate fixed-route bus...
-
Temporary Disabilities
For example, if an individual breaks both legs and is in two casts for several weeks, becomes a wheelchair user for the duration, and the bus route that would normally take him to work is...
