A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
Search Results "Bus Loading Zone"
Filters
Commonly Searched Documents
-
11B-1002.5.1 Clear floor or ground space
-
Design parameter considerations
museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust for narrow-zone...
-
III-7.4300 Parking
If valet parking is provided, there must be an accessible passenger loading zone....
-
3306.2 Walkways
Walkways shall be accessible in accordance with Chapter 11A or 11B as applicable, and shall be designed to support all imposed loads, and the design live load shall be not less than 150...
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
annualized costs related to the requirement that large transit entities provide automated announcement systems for stop and route identification on their large vehicles operating in fixed route bus...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
§8.32(c)
(c) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....
-
§104.23(c)(3)
(3) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
What’s the difference between the Air Carrier Access Act (ACAA) and the Americans with Disabilities Act (ADA)?
., subway and bus systems). [Sec. 382.1]...
-
12143(a) General rule
discrimination for purposes of section 12132 of this title and section 794 of title 29 for a public entity which operates a fixed route system (other than a system which provides solely commuter bus...
-
DOT’s ADA Standards (2006)
are very similar to DOJ’s 2010 Standards but include unique provisions concerning: accessible route location (§206.3) detectable warnings on curb ramps (§406.8) bus...
-
§ 37.43(c)
Areas of transportation facilities that involve primary functions include, but are not necessarily limited to, ticket purchase and collection areas, passenger waiting areas, train or bus...
-
Sennheiser SR 2020-D-US Compact High-Tech Transmitter
Of course, you can connect microphones for announcements, and the system will even follow you on bus or boat tours. The transmitter is operated very easily and comfortably....
-
4.3.11.2 Size
The total number of such 30-inch by 48-inch (760 mm by 1220 mm) areas per story shall be not less than one for every 200 persons of calculated occupant load served by the area of rescue...
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
1002.5.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
