TM 2013-10 Clustered Toilet Rooms Effective Date: June 1, 2013 2012 TAS Reference: 213.2, Exception 4 Based on information received from the U.S....
Search Results "Vertical Reference Plane"
Filters
Commonly Searched Documents
-
Technical Memorandum TM 2013-10 Clustered Toilet Rooms
-
The FSTAG Implementation Process Flowchart
Figure 147 distills the implementation process into a quick reference that provides easy reference as you work through the process....
-
V. Request for Public Comments
types and features of equipment and furniture that will effectively provide equal opportunity to access all services and programs covered by titles II and III of the ADA, on scoping (which refers...
-
DSA IR 11B-3: DETECTABLE WARNINGS AT CURB RAMPS (with revisions issued through Jan. 2011)
Revised 01-01-11 Revised 11-01-07 Issued 01-26-05 See IR 11B-2 and 11B-4 References: 2001 California Building Code, Sections 1127B.5 Item 8 and 1117A.4.7 (prior to the 10/...
-
1.18 Wheelchair space, wheelchair location, or wheelchair seating
1.18 "Wheelchair space," "wheelchair location," or "wheelchair seating" shall mean and refer to a designated space in an auditorium where a person who uses a wheelchair or motorized scooter...
-
Sec. 469.059(b)
the complaint, notify in writing the person filing the complaint that the building or facility is not required to be brought into compliance because of a rule or statute and provide a reference...
-
225(g)(1) Referral of complaint
respect to intrastate telecommunications relay services within a State and certification of the program of such State under subsection (f) of this section is in effect, the Commission shall refer...
-
§104.5(a) Assurances
An applicant may incorporate these assurances by reference in subsequent applications to the Department....
-
504.4 Templates
Where templates are provided, templates allowing content creation that conforms to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated by reference...
-
8.4 CARD CATALOGS
Minimum clear aisle space at card catalogs, magazine displays, or reference stacks shall comply with Fig. 55....
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by section 1003.2.13.5.4 of the International Building Code (2000 edition) or section 1007.6.4 of the International Building Code (2003 edition) (incorporated by reference...
-
SECTION 3101B SCOPE
[DSA-AC] Refer to Chapter 11B for accessibility provisions applicable to public accommodations, commercial buildings and public housing....
-
11B-703.6.1 Pictogram field
The 6-inch vertical dimension applies to the field, not the symbol. The symbol may be smaller than the field....
-
407.2.2.2 Visible Signals
The visible signal elements shall be 2½ inches (64 mm) minimum measured along the vertical centerline of the element....
-
11B-1002.4.4 Clearances
Wheelchair spaces shall not be required to comply with Section 11B-307.4 _|Vertical Clearance|_. [2010 ADAS] Advisory 1002.4.4 Clearances Exception 3. ...
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
Gaps
spaces are provided on amusement rides, the floors of rides must be coordinated with the floors of the load and unload areas so that when the ride is at the load and unload position, the vertical...
-
608.7 Thresholds
In transfer type shower compartments, thresholds 1/2 inch (13 mm) high maximum shall be beveled, rounded, or vertical....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
407.2.2.2 Visible Signals
The visible signal elements shall be 2 1/2 inches (64 mm) minimum measured along the vertical centerline of the element....
-
Adjustable height protocol
The amount of vertical distance that the seat was raised/lowered each time depended on the subject’s perceived and observed transfer abilities....
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head and foot end of the bed....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....