Dining surfaces and work surfaces shall comply with Sections 11B-902.2 and 11B-902.3....
Search Results "Recreational Surfacing"
-
11B-902.1 General
-
11B-902.1 General
Dining surfaces and work surfaces shall comply with Sections 11B-902.2 and 11B-902.3....
-
11B-902.1 General
Dining surfaces and work surfaces shall comply with Sections 11B-902.2 and 11B-902.3....
-
Belson Outdoors Recycled Plastic Universal Access Picnic Table
The heavy-duty 4" x 6" legs provide the kind of durability needed in any type of recreational setting. Table top and seats come in 2" x 10" or 2" x 6" nominal dimensioned planks....
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
Protruding Objects [1016.9]
To prevent injuries to people who are blind or have low vision, whenever possible, maintain the vertical clearance free of tree branches a minimum of 80 inches above the ground surface along...
-
F245.4.4 Location
Outdoor recreation access routes required by F245.4.2 and F245.4.3 shall coincide with or be located in the same area as general circulation paths. Advisory F245.4.4 Location....
-
902.3 Baby Changing Table Work Surface Height
-
Resting Intervals [1018.8]
When the surface of the resting interval is constructed of asphalt, concrete, or boards, the slope of the resting interval must be no steeper than 1:48 (2 percent) in any direction....
-
National Center on Accessibility at Indiana University Bloomington
Over the last two decades, NCA has emerged as a leading authority on access issues unique to park and recreation programs and facilities....
-
2.5.5 Turning Space
Where resting intervals are provided adjacent to an outdoor recreation access route, a turning space complying with ABAAS section 304.3.2 shall be provided....
-
Installation
Installation Surface materials/systems were installed by both contractors and the playground owners’ maintenance staff. ...
-
5.2.2 Transfer Surface Size Recommendations for M302
5.2.2 Transfer Surface Size Recommendations for M302 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer...
-
(1) Transfer Surface Location for Diagnostic Equipment Used in the Supine, Prone, or Side-lying Position
its depth spanned the examination surface’s width, and was located near the center point of the diagnostic equipment surface....
-
Chapter 1: Background
In 2002, the Access Board published the Accessibility Guidelines for newly construct or altered recreation facilities (1)....
-
Hager Companies Door Protection Plate 198S
Door Protection Plate 198S 0.038" gauge stainless steel Materials: - Stainless Steel
-
Hager Companies Door Protection Plate 194S
Door Protection Plate 194S 0.050" gauge with 4-sided bevel Materials: - Aluminum, Brass, Bronze, Stainless Steel
-
Hager Companies Door Protection Plate 199B
Door Protection Plate 199B 0.038" gauge aluminum Materials: - Aluminum Finishes: - Bright gold anodized
-
Hager Companies Door Protection Plate 224S
Door Protection Plate 224S 0.062" gauge with 4-sided bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates -...
-
Don-Jo Mfg., Inc. Push Plate 69
Product Specifications Number 69 Dimensions 3" x...
-
Hager Companies Door Protection Plate 220S
Door Protection Plate 220S 0.062" gauge with no bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates -...
-
Hager Companies Door Protection Plate 190S
Door Protection Plate 190S 0.050" gauge with no bevel Options: - UL listed for US32 and US32D with screw fasteners (must specify UL stamp) - Self-adhesive tape available...
-
Hager Companies Door Protection Plate 223S
Door Protection Plate 223S 0.062" gauge with 3-sided bevel Materials: - Aluminum, brass, bronze, stainless steel Options: - Self-adhesive tape available on all plates -...
-
Rockwood Manufacturing Company K2060 - .060" Thick Plastic Kick Plate - Heavy Duty
Material: .060" Kydex® 160 PVC Acrylic Alloy Plastic* Fastener: #6 x 3/4 TH SMS Ordering: Specify height x width x color. Add any options. Weight: 8" x 34" = 1.0...
