Filter your search by information type, media type, search type, or a combination of all

Allen Face F-Meter® Rolling Floor Profiler

Product Description

Product Description

The F-Meter® is the finest floor profiling instrument ever made. Pulled manually across the floor, the F-Meter® can measure up to 2500 linear feet (5,000 point elevation readings!) per hour - a data collection rate 3 to 5 times faster than any other device.

  • Fastest unit on the market

  • Ideal for testing new large (>10,000 sq ft) Slabs

  • Measures up to 5000 point elevations per hour

  • Fully ASTM / ACI compliant

  • Sensor accuracy within + / - 0.002" per reading

  • No external computer to deal with

  • Will not lose data - ever!

  • Single click downloading into Excel®

  • Out-of-the-box & ready to go in 10 seconds

  • Works 10 + hours on internal Lithium-Ion pack

  • No batteries to change!

  • Imperial (12") or Metric (300mm) versions

The F-Meter® supports measurement and reporting of both overall and minimum local FF and FL numbers (including the generation of all associated data lists, profile graphs, and daily reports) in full accordance with the latest versions of ASTM E-1155 and ACI-117. With just 2 mouse clicks, in just seconds, the unit downloads everything into an Excel® Workbook on your PC or laptop.

The F-Meter® requires no special skills to operate. After powering up and zeroing the instrument, the operator simply uses the <GO> and <STOP> buttons to record the profile runs, which can each range from 12 to 120 feet in length.

The F-Meter's® non-volatile memory will retain up to 99 run records, even if the unit is turned off or loses power. This feature eliminates all concerns about data loss and fully supports consolidated, back-at-the-office, data processing and report generation.

The F-Meter® lowers the time and cost for formal F-Number measurement and reporting to insignificance. The instrument thus makes practical the routine measurement of FF and FL on every new floor installation - from the largest industrial project to the smallest commercial/residential job. By providing fast and reliable estimates of every new floor's FF, FL, and FE numbers (FE is the new grade control F-number), the F-Meter® gives all parties immediate protection against any type of floor tolerance problem.

Product Details

Product Cut Sheet/Specs/Demo: http://www.allenface.com/pdf/FMeter_Manual.pdf

Related Keywords

Related Section Numbers

Manufacturer's Compliance Claim

The F-Meter® lowers the time and cost for formal F-Number measurement and reporting to insignificance. The instrument thus makes practical the routine measurement of FF and FL on every new floor installation - from the largest industrial project to the smallest commercial/residential job. By providing fast and reliable estimates of every new floor's FF, FL, and FE numbers (FE is the new grade control F-number), the F-Meter® gives all parties immediate protection against any type of floor tolerance problem.

Product Compliance

Not applicable; There are no technical requirements in the 2010 ADA Standards for this product

Disability Types

  • Other Mobility
  • Vision
  • Wheelchair/Scooter

Product Application

  • Non-Architectural Product

[MORE INFO...]