Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
Search Results "Maximum Reach Depth"
-
11B-306.3.4 Clearance reduction
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
804.3 Kitchen Work Surface (Exception)
The exception does not require work surfaces to be provided at kitchen counters where a table is provided within the kitchen; an electric outlet is provided within reach of the table; and...
-
11B-411.4.6.1 Location
Controls shall be located within one of the reach ranges specified in Section 11B-308....
-
11B-411.4.6.1 Location
Controls shall be located within one of the reach ranges specified in Section 11B-308....
-
AquaTrek2 ADA Ladder System
With a full 12 inch tread depth along with inside stepped handrails that provide a horizontal hand grab with a horizontal foot step....
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the restrooms' vestibule doors is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). v....
-
Facility
Knee and toe clearance complying with 306 shall be providing. (17” min. depth.) 902 Dining Surfaces and Work Surfaces. 902.3 Height....
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
5.8.2.7 Base Support Allowance Recommendation
Base supports can be a maximum of 1½ inches high....
-
Dispersion: ADA Standard Section 1005.2.1.1
Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank....
-
M305.2.1 Location (Section-by-Section Analysis)
The MDE NPRM proposed that transfer supports be located within reach of the transfer surface and not obstruct transfer onto or off of the surface when in position (proposed M305.2.1)....
-
Introduction
Abdomen depth (AD) 2. Footrest clearance height and depth...
-
4.1 Introduction
In particular, the impact of the methods used in research on findings needs to be studied in depth....
-
25.1 Q. It appears from Figure 2(c) of the Guidelines (under Requirement 5) that there is a 34 inch height requirement for kitchen counters and vanities. Is this true?
Figure 2(c) of the Guidelines is illustrating the maximum side reach range over an obstruction....
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login! -
Transfer Surface Size – M302.2.2 Seated Position
Transfer Surface Size – M302.2.2 Seated Position The issue of seat depth was discussed and decided during the full committee meetings as follows: depth of 17 inches minimum....
-
214 and 611 Washing Machines and Clothes Dryers
An exception will permit the maximum height for the tops of these machines to be 2 inches higher than the general requirement for maximum high reach over an obstruction....
-
FIGURE INDEX
306.3 Knee Clearance Figure 307.2 Limits of Protruding Objects Figure 307.3 Post-Mounted Protruding Objects Figure 307.4 Vertical Clearance Figure 308.2.1 Unobstructed Forward Reach...
-
11B-1005.2.1.1 Dispersion
Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank. ◼...
-
11B-1005.2.1.1 Dispersion
Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank. ◼...
-
Maddak Wall Switch Extension Handle
Puts wall switches within easy reach of children, wheelchair users or people with limited reach. It provides a 12" (30.5 cm) extension to any standard toggle switch....
-
M301.3.1 Transfer Supports
C) The maximum distance from the transfer surface to either the transfer support or the positioning support is 1.5 inches....
-
9.2.2(7) Kitchens, Kitchenettes, or Wet Bars
Counter tops and sinks shall be mounted at a maximum height of 34 in (865 mm) above the floor....
