Floor or ground surfaces of a clear floor or ground space shall comply with Section 11B-302....
Search Results "Surface Slope"
Filters
Commonly Searched Documents
-
11B-305.2 Floor or ground surfaces
-
Stabila, Inc. Magnetic Tech Digital Electronic Level Type 96M-2
FEATURES: Precise slope and angle measurements for metal fabricators, commercial carpenters, plumbers, etc......
-
1.2.2
1.2.2 When flatness of running slope for an accessible surface other than a ramp is measured according to Section 1.1.5 no more than 20% (rounded to the nearest whole number) of the measurements...
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
Surface Slopes
The proposed rule would have required clear ground spaces to have slopes not steeper than 1:50 in any direction, and would have permitted slopes not steeper than 1:33 when necessary for...
-
M-D Building Products, Inc. GEN3 SmartTool™ Digital Level
shows orientation for next step with the word “UP” Takes less than 2 minutes Five Instant Angle Conversion Modes Degrees - Machine set-up, pipe bending, saw set-up Percent Slope...
-
1. & 2. Sidewalk Slope
1. ...do the sidewalks have cross slopes (i.e.: slopes tilting side to side) less than 1:50 (critical dimension of ´" or less) [sic] so persons who use wheelchairs can conveniently negotiate...
-
Floor or Ground Surfaces: ADA Standard Section 502.4
Section 502.4 covers the current ADA Standards for the floor or ground surfaces of accessible parking spaces.
-
4.7.3 Slope
The slope of the clear floor or ground spaces required by section 4.0 shall not exceed 1:48 (2 percent) in any direction. Exception....
-
1018.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1018.7.1) and cross slope (1018.7.2) of beach access routes....
-
Width [4.7.3] and Surface [4.7.4]
Curb ramp surfaces, including flared sides, must comply with requirements in 4.5 for ground and floor surfaces be "stable, firm, and slip resistant."...
-
11B-503.4 Floor and ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved....
-
1018.7 Slopes
The slopes of beach access routes shall comply with 1018.7....
-
1018.7 Slopes
The slopes of beach access routes shall comply with 1018.7....
-
1017.7.1 Maximum Running Slope and Segment Length
This section requires that not more than 30 percent of the total length of a trail have a running slope steeper than 1:12 (8.33%), and that the running slope of any segment of a trail not...
-
6.7 Slope
The slopes of beach access routes shall comply with 6.7.1 and 6.7.2...
-
1018.7.2 Cross Slope
The cross slope shall not be steeper than 1:48....
-
1018.7.2 Cross Slope
The cross slope shall not be steeper than 1:48....
-
Q5.) What dimensions and conditions can practitioners reasonably consider to be compliant when the conditions, as constructed, do not meet the technical requirements exactly and there are no official, published, industry-developed tolerances?
Sloped concrete and asphalt surfaces are an excellent example of this problem. ...
-
1018.7.2 Cross Slope
This section requires the cross slope of beach access routes to not be steeper than 1:48....
-
6.7.2 Cross Slope
The cross slope of a beach access route shall be no more than 1:33 (3 percent)....
-
1016.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1016.7.1) and cross slope (1016.7.2) of outdoor recreation access routes....
-
11B-504.4 Tread surface
Exception: Treads shall be permitted to have a slope not steeper than 1:48....
