Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight....
Search Results "Handrail Continuity"
Commonly Searched Documents
-
Handrails [§504.6, §505]
-
505 Handrails
505 Handrails The 2010 Standards add a new technical requirement at section 406.3 for handrails along walking surfaces....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
R409.10 Handrail Extensions
R409.10 Handrail Extensions. Handrail gripping surfaces shall extend beyond and in the same direction of ramp runs and stair flights in accordance with R409.10....
- Inpro Corporation IPC® 855 Handrail
-
§ 38.23(c)(8) Handrails
(8) Handrails....
-
§ 38.95(c)(8) Handrails
(8) Handrails....
-
505 Handrails
505 Handrails...
-
R409 Handrails
R409 Handrails...
-
§ 38.159(c)(8) Handrails
(8) Handrails....
- Inpro Corporation IPC® 1000 Handrail
-
11B-505.2.1 Orientation
The orientation of at least one handrail shall be in the direction of the stair run, perpendicular to the direction of the stair nosing, and shall not reduce the minimum required width of...
- Inpro Corporation IPC® 800 Handrail
-
§ 38.83(b)(13) Handrails
(13) Handrails....
-
11B-505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
11B-505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
11B-505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
11B-505.2 Where required
Handrails shall be provided on both sides of stairs and ramps....
-
Handrails
Handrails Sloped entries must have handrails on both sides regardless of the slope. Handrail extensions are required at the top landing but not at the bottom....
-
Where Required: ADA Standard Section 505.2
Section 505.2 covers the current ADA Standards for where handrails are required.
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of...
-
1009.6.2 Handrails
1009.6.2 Handrails. The width between handrails shall be 20 inches (510 mm) minimum and 24 inches (610 mm) maximum....
-
§ 38.95(b)(13) Handrails
(13) Handrails....
-
A4.26.2 Size and Spacing of Grab Bars and Handrails
This specification allows for alternate shapes of handrails as long as they allow an opposing grip similar to that provided by a circular section of 1‒1/4 in to 1‒1/2 in (32 mm to 38 mm)...