All Hollaender ADA handrail systems are shipped as a kit, and easily reconfigurable if necessary....
Search Results "Handrail Continuity"
Filters
Commonly Searched Documents
-
Hollaender Manufacturing Company ADA Railing Systems
-
Handrails [4.8.5]
Handrails are required on both sides for ramps with a rise more than 6 inches or a horizontal length more than 72 inches....
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
SECTION 1014 HANDRAILS
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
11B-1009.3.3 Handrails
At least two handrails complying with Section 11B-505 shall be provided on the sloped entry....
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface....
-
Handrails: ADA Standard Section 1008.2.5.3
Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1....
-
PromenAid Handrail System Advertisment Video
Short video advertising the benefits of the handrail system for fall prevention, safety, and mobility assistance within the home environment....
-
11B-505.7 Cross section
Handrail gripping surfaces shall have a cross section complying with Section 11B-505.7.1 or 11B-505.7.2....
-
1011.11 Handrails
... [DSA-AC] For applications listed in Section 1.9.1 regulated by the Division of the State Architect-Access Compliance, see Chapter 11B, Sections 11B-504.6 and 11B-505.
-
How to Measure Ramp Handrail Extensions
This short video considers some of the most common factors required for measuring ramp handrail extensions for compliance surveys....
-
PromenAid Handrail System Review by Jon Eakes Video
He points out the various feautes and benefits of the handrail system....
-
505.3 Continuity
505.3 Continuity. Handrails shall be continuous within the full length of each stair flight or ramp run....
-
§ 38.83(c)(8) Handrails
(8) Handrails....
-
505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
505.3 Continuity
Handrails shall be continuous within the full length of each stair flight or ramp run....
-
11B-604.7.1 Dispensers
Dispensers shall not be of a type that controls delivery or that does not allow continuous paper flow....
-
Handrails
Handrails Pool stairs must have handrails with a minimum width between the rails of 20 inches and a maximum of 24 inches....
-
Handrails [4.9.4]
Continuous handrails are required along both sides of stairs. A center rail is not specified for wide stairways by ADAAG but may be required by local building or life safety codes....
-
505 Handrails
Specifications for handrails in section 505 apply to those provided at ramps, stairs, and along walking surfaces....
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight....
-
505 Handrails
505 Handrails The 2010 Standards add a new technical requirement at section 406.3 for handrails along walking surfaces....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
