Automatic doors and automatic gates shall comply with Section 11B-404.3. Full-powered automatic doors shall comply with ANSI/BHMA A156.10....
Search Results "Door Hardware"
Filters
Commonly Searched Documents
-
11B-404.3 Automatic and power-assisted doors and gates
-
Mockett DH2 Door Handle Installation
Installation guide for the DH2 Door Handle, including Single-Sided and Back to Back Mounting installations. ...
-
Low Energy Doors and Gates [§404.3]
Low Energy Doors and Gates [§404.3] Low energy doors and gates usually require activation by the user through a push plate or control and are often used in moderate traffic locations...
-
A4.12.2 Window Hardware
Locks, cranks, and other window hardware should comply with 4.27....
-
Power Operation: ADA Standard Section 409.3.1
Section 409.3.1 covers the current ADA Standards for the power operation of private residence elevator doors.
-
Locks and Security Devices
Locks and Security Devices Permanently fixed portions of locks, including key locks, bolts, card readers, and push-button devices with number codes for general use by building...
-
Mockett DH3/BB Square Door Handle Installation Video
This is a How to Install video for the Mockett DH3/BB Square Door Handle. Traditional square pull design gives a bold striking look on any door type. ...
-
BHMA
Builders Hardware Manufacturers’ Association 355 Lexington Avenue, 15th Floor New York, NY 10017-6603 A 156.10-2017: Power Operated Pedestrian Doors 11B-404.2.9, 11B-404.3...
-
Doorways without Doors or Gates, Sliding Doors, and Folding Doors: ADA Standard Section 404.2.4.2
Section 404.2.4.2 covers the current ADA Standards for maneuvering clearances at doorways without doors or gates, sliding doors, and folding doors.
-
Problem Four (Entrance)
Problem Four: The entrance door has a door knob and/or latch that requires tight pinching and twisting and is not accessible....
-
PRL Glass Systems Inc. Glass Door Panic System
At PRL Glass Systems Inc. http://prlglass.com our glass door panic system is manufactured in the highest quality in the industry....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
Doorways less than 36 inches (914 mm) wide without doors or gates, sliding doors, or folding doors shall have maneuvering clearances complying with Table 11B-404.2.4.2....
-
Hardware
A tangible device, equipment, or physical component of ICT, such as telephones, computers, multifunction copy machines, and keyboards.
-
Hardware
A tangible device, equipment, or physical component of ICT, such as telephones, computers, multifunction copy machines, and keyboards.
-
Hardware
A tangible device, equipment, or physical component of ICT, such as telephones, computers, multifunction copy machines, and keyboards.
-
Hardware
A tangible device, equipment, or physical component of ICT, such as telephones, computers, multifunction copy machines, and keyboards.
-
Toilet Rooms North (Celebrity Spies)–Men [sic]
The force required to push or pull open the men's toilet room door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). ee....
-
Toilet Rooms South (Briefing Theater)
The force required to push or pull open the men's toilet room door is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). kk....
-
6.14.2 Gate Hardware
Gate hardware shall comply with operable controls requirements in ABAAS section 309.4 and 404.2.7....
-
Operating Hardware
Operating Hardware Common Problem: The shape of the hardware on accessible doors, and on faucets, fixed lamps, drapery controls, and heating and air conditioning controls in spaces...
-
Entrances
Additionally, the door hardware must not require tight grasping, pinching, or twisting, and the height of the door threshold must not be greater than ½ inch....
-
Manual Doors and Gates [§404.2]
Manual Doors and Gates [§404.2]...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
-
§ 35.151(b)(4)(i)(B)
(B) For the purposes of this section, alterations to windows, hardware, controls, electrical outlets, and signage shall not be deemed to be alterations that affect the usability of or access...
