Additional maneuvering space should be provided at turns or changes in direction, transit stops, recesses and alcoves, building entrances, and along curved or angled routes, particularly...
Search Results "Alcove"
Filters
Commonly Searched Documents
-
R302.3 Continuous Width
-
Hallways
a corridor with wall-mounted objects that are not protruding objects because they do not protrude more than 4 inches from the wall, are mounted above 80 inches or are recessed into an alcove...
-
11B-802.1.3 Depth
A single wheelchair location space with side entry must functionally be usable as if it were within an alcove, requiring the user to maneuver back and forth to get into position, and thus...
-
11B-802.1.3 Depth
A single wheelchair location space with side entry must functionally be usable as if it were within an alcove, requiring the user to maneuver back and forth to get into position, and thus...
-
11B-802.1.3 Depth
A single wheelchair location space with side entry must functionally be usable as if it were within an alcove, requiring the user to maneuver back and forth to get into position, and thus...
-
Maneuvering Clearances at Doors [4.13.6]
Forward approach clearances are required at doors located in alcoves. ...
-
Technical Memorandum TM 2013-14 Dining Surfaces
Therefore, accessible dining surfaces shall be 30” minimum in length based on 305.5 or 36” minimum if the clear floor space is located in an alcove based on TAS 305.7.1. ...
-
Continuous Width (R302.3) (Section-by-Section Analysis)
Advisory information recommends additional maneuvering clearance at turns or changes in direction, recesses and alcoves, building entrances, and along curved or angled routes, particularly...
-
Oasis Mirage - Dual Option Cooler
bright white or black with silver accents to fit any décor Easy to use controls located on front display panel for tri-temperature dispensing hot, cold or ambient water Large faucet alcove...
-
1118B.4
If a clear floor space is located in an alcove or otherwise confined on all or a part of three sides, additional maneuvering clearances shall be provided as shown in Figure 11B-5A(b)....
-
FIGURE INDEX
Figure 304.3.2 T-Shaped Turning Space Figure 305.3 Clear Floor or Ground Space Figure 305.5 Position of Clear Floor or Ground Space Figure 305.7.1 Maneuvering Clearance in an Alcove...
-
1124B
If a clear floor space is located in an alcove or otherwise confined on all or a part of three sides, additional maneuvering clearances shall be provided as shown in Figure 11B-5A(b)....
-
4.3.3 Clear Floor Area
For example, when designing an alcove at the side of a large open space where the length of a device must be addressed but the width is not an issue because there is plenty of room to one...
