There is also no accepted standard method for using a digital inclinometer, lasers, or other surveying equipment to measure ramp slope and cross slope....
Search Results "Track Crossing"
-
Some existing measurement protocols
-
Additional Technical Criteria Considered for Handrails on Ramps
These technical criteria are available at http://www.access-board.gov/ada-aba/final.cfm#a505 and address continuity, height, clearance, gripping surface, cross section, surfaces, fittings...
-
Changes in Level at Entry to Wheelchair Spaces (M303.3)
Ramp runs would be required to have a running slope not steeper than 1:12 and a cross slope not steeper than 1:48....
-
Alterations to Existing Facilities
For example, if a new bench is installed on a sidewalk that has a cross slope exceeding 2 percent, the sidewalk is not required to be altered to reduce the cross slope because the bench...
-
Soiltac Powder Mix-In
Where there was water flow crossing the segment, the surface was soft under foot but returned to a natural surface state....
- Panda S.66 Solid Wood Folding Door System
- EZJamb SlideSet Modern Pocket Door Frame System
- Pilot Rock AT Series Traditional A-Frame Picnic Table With Steel Braces - Using Recycled Plastic
- Detectable Warning Systems, Inc. AlertTile® Detectable Warning
- Konica Minolta bizhub C224
- Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
-
EXTREME WEATHER
RESOURCES: Cooling Center Finder nyc.gov/beattheheat PlowNYC Track plow and salt operations at NYC.gov/severeweather Home Energy Assistance Program (HEAP) Provides low-income...
-
Sections 505.10.2 and 505.10.3
Commenters noted that the 2010 Standards will require handrail gripping surfaces with a circular cross section to have an outside diameter of 2 inches, and that this requirement would impose...
-
Issue 7: Repair/replacement (put it back right!)
When the APS is not correctly installed, there is a risk that a person who is blind will cross a street with the wrong WALK indication or in the wrong direction....
-
Station 6-Speed
The video was subsequently reviewed to determine the times that participants crossed each of the two lines....
-
Handrails Along Walking Surfaces [§403.6, §505]
Handrails can have circular or non-circular cross-sections, but must have rounded edges. The gripping surface and adjacent surfaces must be free of abrasive or sharp elements....
-
§ 38.23(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.95(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
§ 38.125(b)(13) Handrails
The handrail shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less...
-
1015.2 Where required
In assembly seating areas at cross aisles in accordance with Section 1029.16.2....
-
§ 38.83(b)(13) Handrails
Handrails shall have a cross-sectional diameter between 11/4 inches and 11/2 inches or shall provide an equivalent grasping surface, and have eased edges with corner radii of not less than...
-
Expert Report of Douglas J. Anderson, RAS, CASP, LCM Architects (August 8, 2018)
Sidewalks & Walkways: The cross slope on the exterior ramp exceeds the maximum slope allowed of 1:48 (1991 ADA Stds 4.8.6; 2010 ADA Stds 405.3)....
- Horton Profiler ® Series 2000 Linear Drive or 2000B Belt Drive System
- Harmar IL500 Sierra Incline Platform Lift