Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
Search Results "Water Closet Seat"
-
11B-610.4 Structural strength
-
4.7 Utilities including Water Hydrants at Recreation Sites
[See subsections ...]
-
1002.4.7 Companion Seats
1002.4.7 Companion Seats....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
American Specialties Compact Rectangular Phenolic Fold-Up Shower Seat 8203 CAD File
-
American Specialties Compact Rectangular Phenolic Fold-Up Shower Seat 8203 BIM File
-
608.4 Seats (Exception)
608.4 Seats (Exception) This section requires a folding or non-folding seat to be provided in transfer type shower compartments....
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-603.2.3 Door swing
SECTION TITLE NOTES 11B-603.2.3 Door swing. Clarifies that doors to accessible toilet compartments are...
-
4.34.5.7 CLEAR FLOOR SPACE
Clear floor space at fixtures may overlap.
-
American Specialties Retractable Shower Seat Model 170
Requires the Premium User plan or above. (Login or upgrade your account!) -
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
Seat width and depth
We selected 18 inches minimum seat width as a starting point with the potential to grow to 30 inches. ...
-
Seat and Row Designations
Commenters requested that seat and row designations in assembly areas be exempt from the requirements for signage....
-
Requirement 6. Reinforced walls for grab bars.
that all premises within covered multifamily dwelling units contain reinforcements in bathroom walls to allow later installation of grab bars around toilet, tub, shower stall and shower seat...
-
Only Safety Affects Seat Assignments
Only Safety Affects Seat Assignments You must not exclude a passenger with a disability from any seat in an exit row or other location or require a passenger with a disability to sit...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Integration: ADA Standard Section 221.2.2
Section 221.2.2 covers scoping requirements in the current ADA Standards for integration of wheelchair spaces in assembly areas.
-
4.1.2 Number of Wheelchair Seating Spaces
Each picnic table shall have at least one wheelchair seating space....
-
Bobrick Reversible Folding Shower Seat B-5191 Elevations
Requires the Premium User plan or above. (Login or upgrade your account!)
