Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
Search Results "Horizontal Projection"
Filters
Commonly Searched Documents
-
404.2.4.3 Recessed Doors and Gates
-
502.4 Floor or Ground Surfaces
Built-up curb ramps are not permitted to project into access aisles and parking spaces because they would create slopes greater than 1:48....
-
Will CALGreen be amended to require that some parking spaces are designed so that they can comply with Chapter 11B requirements when converted to EV charging spaces (i.e. slope, vertical clearance, path of travel)?
While the California Green Code nonresidential mandatory measures require projects to identify an EV space, provide an electrical raceway to the service panel, and provide adequate capacity...
-
404.2.4.3 Recessed Doors and Gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (455 mm) of the latch side of a doorway projects more than 8 inches (205 mm) beyond the...
-
Stacks [8.5]
Stacks [8.5] Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more...
-
Attachment B
the Consent Decree: Description of Element: Location of Element: ____________________ Date __________________________________ Signature of Independent Licensed Architect Project...
-
Lutron Sivoia QS Wireless Shading System
control the entire family of Lutron automated window treatments, including roller shades, Venetian blinds, traditional drapery tracks, Kirbé® Vertical Drapery System, tensioned shades, horizontal...
-
2. Analysis of footrest clearance height and depth
Three dimensions were computed on the right-side for the sub-set of wheelchairs with footrests: Abdomen-Castor edge depth: measured as the horizontal distance from the abdomen to...
-
Bradley Roll-Towel Dispenser / 10.5 Gallon Waste Receptacle 2277
Series - Satin Finish Stainless Steel Roll towels 10.5 gallon waste capacity Model 2277 - Recessed - BradEX Model 2277-10 - Semi-recessed (recesses 3-1/2"; projects...
-
Bradley High Capacity Towel Dispenser / 12 Gallon Waste 237
Satin Finish Stainless Steel Single, multi or C-fold towels 12 gallon waste capacity Model 237 - Recessed Model 237-10 - Semi-recessed (recesses 3-1/2"; projects...
-
Bradley Low Capacity Towel Dispenser / 1.25 Gallon Waste Receptacle 229
Stainless Steel Holds 200 multi-fold or 100 C-fold paper towels 1.25 gallon waste capacity Model 229 - Recessed Model 229-10 - Semi-recessed (recesses 2"; projects...
-
Bradley Low Capacity Towel Dispenser 2442
Satin Finish Stainless Steel Holds 400 multi-fold or 300 C-fold paper towels Model 2442 - Recessed BradEX Model 2442-10 - Semi-recessed (recesses 2-1/8"; projects...
-
Bradley High Capacity Towel Dispenser / 8.2 Gallon Waste 238
Satin Finish Stainless Steel Single, multi or C-fold towels 8.2 gallon waste capacity Model 238 - Recessed Model 238-10 - Semi-recessed (recesses 3-1/2"; projects...
-
Perkins School for the Blind - Bus Stop Challenge
For the audio described version of this video, click: https://youtu.be/NOjUsunoVbk With help from a Google.org grant, Perkins School for the Blind is embarking on a groundbreaking project...
-
11B-810.5.3 Platform and vehicle floor coordination
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
810.5.3 Platform and Vehicle Floor Coordination
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
11B-810.5.3 Platform and vehicle floor coordination
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
11B-810.5.3 Platform and vehicle floor coordination
In light rail, commuter rail, and intercity rail systems where it is not operationally or structurally feasible to meet the horizontal gap or vertical difference requirements of part 1192...
-
307.2 Protrusion Limits
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
-
11B-1002.4.3 Gaps
coordinated so that, when amusement rides are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (15.9 mm) and the horizontal...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
307.2 Protrusion Limits
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
-
1002.4.3 Gaps
coordinated so that, when amusement rides are at rest in the load and unload position, the vertical difference between the floors shall be within plus or minus 5/8 inches (16 mm) and the horizontal...
-
602.6 Water Flow
The angle of the water stream shall be measured horizontally relative to the front face of the unit....
