Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
Search Results "Measuring Instrument"
Filters
Commonly Searched Documents
-
703.2.5 Character Height
-
R305.2 Placement
Where the back of curb edge is tooled to provide a radius, the border dimension should be measured from the end of the radius....
-
4.1.6(4)(d)
(ii) If existing thresholds measure 3/4 in (19 mm) high or less, and are beveled or modified to provide a beveled edge on each side, then they may be retained....
-
§ 37.135(d) Phase-in of implementation
If the date for full compliance specified in the plan is after January 26, 1993, the plan shall include milestones, providing for measured, proportional progress toward full compliance....
-
Industry Standards
of Certain Walkway Surfaces when Considering Footwear Traction ASTM F 1637-02 Standard Practice for Safe Walking Surfaces ASTM F 1951-99 Wheelchair Work Measurement...
-
Executive Summary
To develop a standard for surface roughness, a literature review on previous studies related to wheelchair vibrations as well as roughness measurement and analysis techniques was completed...
-
3.1 Getting Weighed
But now she was pregnant and she knew that accurate measurement of her weight was an important part of her prenatal care....
-
American Specialties Folding Shower Seat 8206-L
Seat measures 33" (840 mm) wide and projects 22 7/8" (580 mm) from wall....
-
11B-404.2.4.3 Recessed doors and gates
457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects more than 8 inches (203 mm) beyond the face of the door, measured...
-
Notes
II The IDeA Center in its research defined wheelchair wheelbase as the distance from the center of the primary drive wheel to the center of the caster measured parallel to the floor....
-
1016.5 Obstacles
This section requires obstacles to not exceed 1/2 inch in height measured vertically to the highest point....
-
Slip Resistance
While different measurement devices and protocols have been developed over the years for use in the laboratory or the field, a widely accepted method has not emerged....
-
Clearance Around Base (M301.4.2 and M302.4.2)
M301.4.2 and M302.4.2 would require the base of the equipment to provide a clearance 6 inches high minimum measured from the floor and 36 inches deep minimum measured from the edge of the...
-
11B-604.7 Dispensers and disposal units
Toilet paper dispensers shall comply with Section 11B-309.4 _|Operation|_ and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the...
-
2101KG HR Digital Platform Scale with Mechanical Height Rod
Also included is a mechanical height rod so users can measure height and weight together. ...
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the transfer...
-
§ 36.304(d)(5) Qualified small business
where readily achievable for a given year if, during that tax year, the entity has spent an amount equal to at least one percent (1%) of its gross revenue in the preceding tax year on measures...
-
703.2.5 Character Height
Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter "I"....
-
Cross Slope
Cross Slope—The percentage of rise to length when measuring the trail tread from edge to edge perpendicular to the direction of travel....
-
4.34.3(2)(a) Reach Depth Not More Than 10 in
Where the reach depth to the operable parts of all controls as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
Drinking Fountain Water Flow Tool
Drinking Fountain Water Flow Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring drinking fountain water flow....
-
1.1.2 Walks
Measure walks and other non - ramp pedestrian surfaces for overall running slope and cross slope as well as local running slope and cross slope variations (flatness) in accordance with 1.1.3...
-
1. Job-Related
qualification standard, test or other selection criterion operates to screen out an individual with a disability, or a class of such individuals on the basis of disability, it must be a legitimate measure...
