Signs that are sized to the maximum dimensions permitted under legitimate local, state or federal regulations or ordinances shall be considered in compliance with 4.30.2 and 4.30.3 for purposes...
Search Results "Dimension Range"
-
10.2.1(3)
-
1016.6 Openings
Elongated openings should be placed so that the long dimension is perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
-
Knee Clearance: Clearance as Measured from Distal Knee Point - Manual Wheelchair
It references dimensions of clearance height and depth to the distal knee point on a person....
-
Knee Clearance: Clearance as Measured from Anterior-Most Abdomen Point - Manual Wheelchair
It references dimensions of clearance height and depth to the forward-most abdomen point on a person....
-
11B-703.6.1 Pictogram field
The 6-inch vertical dimension applies to the field, not the symbol. The symbol may be smaller than the field....
-
EZConcept – Global Architectural Solutions
EZConcept – the new overarching brand amalgamating Studco Building System's EZ range of products....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
This dimension allows a user to grab it from any point on the platform....
-
B. Slopes
.: in the direction of travel) not more than 1:20 (critical dimension of 1 1/4" or less)?...
-
What is an Accessible Seat and Who Can Use One?
Accessible seats are spaces specifically designed for wheelchairs and include features such as an accessible approach, location at grade, clear floor space, and larger dimensions....
-
706.4 Sound Pressure Level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
M301.4 Lift Compatibility
The dimensions there are 150mm x 1000mm. Recommendation here is to shrink the 1120mm dimension to 1000mm (39”) dimension to harmonize with the international standard....
-
Exceptions Considered for Wheelchair Spaces on Raised Platforms
Comments should include information on sources to support the dimensions, where possible....
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
604.8.3 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
7(1)(c)
(c) In U-shaped kitchens with sink or range or cooktop at the base of the "U", a 60-inch turning radius is provided to allow parallel approach, or base cabinets are removable at that location...
-
603.4 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
§1193.41(g) Operable without time-dependent controls
Alternatively, a response time may be required if it can be by-passed or adjusted by the user over a wide range....
-
11B-706.4 Sound pressure level
Assistive listening systems shall be capable of providing a sound pressure level of 110 dB minimum and 118 dB maximum with a dynamic range on the volume control of 50 dB....
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
The Committee used a 24-inch dividing point for table width to accommodate the dimensions for the maximum reach range....
-
NOTES
ANSI/AAMI HE75 further recommends that the height of patient support surfaces "should be adjustable to a position high enough to accommodate tall health care providers and the range of medical...
-
502.3.3 Values
Any current value(s), and any set or range of allowable values associated with an object, shall be programmatically determinable....
-
11B-605.1 General
Stall-type urinals provide greater accessibility for a broader range of persons, including people of short stature....
-
Appendix: Revised Annotated Bibliography
Dimensions measured but not reported: range of motion, right elbow and shoulder; trunk length; acromial height; and anterior foot length. 24. Jarzem, P.F. and Gledhill, R....
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....