Grab bars shall be provided on the side wall closest to the water closet and on the rear wall. [ECTCR UFAS 4.34.5.2(3)] EXCEPTIONS: 1....
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
604.5 Grab Bars
-
604.5 Grab Bars
Grab bars shall be provided on the side wall closest to the water closet and on the rear wall. EXCEPTIONS: 1....
-
1134A.7, Item 1
FIGURE 11A-9M WING WALL OR CABINET AT WATER CLOSET Exception: The 48-inch (1219 mm) minimum clear width may be reduced to 36 inches (914 mm) for lavatories, cabinets, wing walls, or...
-
FUNDAMENTAL ALTERATIONS AND UNDUE BURDENS {35.150}
FUNDAMENTAL ALTERATIONS AND UNDUE BURDENS {35.150} Public entity has burden of proof for relief Decision must be made by head of the public entity after considering all...
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
903.2 Clear Floor or Ground Space
Clear floor or ground space complying with 305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
-
1007.7.4 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
Honeywell SP(W) / SPC Series Indoor Speaker/Strobes
Rotary switch simplifies field selection of speaker voltage and power settings 11 field selectable candela settings for wall and ceiling speaker strobes....
-
4. ABSOLUTE DIMENSIONS
For instance, consider the requirement that water closets (toilets) be an absolute 18" from the adjacent wall to the centerline....
-
11B-604.8.1.1 Size
Wheelchair accessible compartments shall be 60 inches (1524 mm) wide minimum measured perpendicular to the side wall, and 56 inches (1422 mm) deep minimum for wall hung water closets and...
-
§ 37.213(a)(2)(i)
The operator shall transmit the form no later than the end of the next business day following the request;...
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
The technical requirements for transfer supports is in M305.2 of the final rule and has been reorganized to mirror the two types of transfer surfaces (end and side) in the final rule for...
-
604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
Grab Bars
Grab bars are required on one side wall and the rear wall....
-
H1
.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
-
4.30.6 Mounting Location and Height
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
11B-604.9.1 Location
The water closet shall be located with a wall or partition to the rear and to one side....
-
Stories of Emergency Use of Mobile Devices
He injured his leg and his head. A first aid app on his I phone instructed him on the best way to create a tourniquet for his leg and a bandage for his head....
-
711.3.2 Membrane penetrations
Where walls and partitions are required to have a minimum 1-hour fire-resistance rating, recessed fixtures shall be installed such that the required fire resistance will not be reduced....
-
Maneuvering Clearances at Doors [4.13.6]
Clearance to the wall plane next to the door (even when the door is in a recess) is essential....
-
§ 35.106 Notice.
regarding the provisions of this part and its applicability to the services, programs, or activities of the public entity, and make such information available to them in such manner as the head...
-
Hager Companies Door Protection Plate 190S
190S 0.050" gauge with no bevel Options: - UL listed for US32 and US32D with screw fasteners (must specify UL stamp) - Self-adhesive tape available on all plates - Spanner head...
-
11B-903.2 Clear floor or ground space
Clear floor or ground space complying with Section 11B-305 shall be provided and shall be positioned at the end of the bench seat and parallel to the short axis of the bench....
