Commenters requested that seat and row designations in assembly areas be exempt from the requirements for signage....
Search Results "Tactile Exit Signage"
Commonly Searched Documents
-
Seat and Row Designations
-
A4.30.2 Character Proportion
The legibility of printed characters is a function of the viewing distance, character height, the ratio of the stroke width to the height of the character, the contrast of color...
-
A4.30.2 CHARACTER PROPORTION
The legibility of printed characters is a function of the viewing distance, character height, the ratio of the stroke width to the height of the character, the contrast of color...
-
§27.71(k)(6)(iv)(A) Contrast.
However, tactile symbols required by (k)(6)(iv)(B) are not required to comply with paragraph (k)(6)(iv)(A) of this section....
-
§ 27.71(k)(6)(iv)(A) Contrast
However, tactile symbols required by (k)(6)(iv)(B) are not required to comply with paragraph (k)(6)(iv)(A) of this section....
-
4.1.7(3)(e)
Exhibits and signage displayed horizontally (e.g., open books), should be no higher than 44 in (1120 mm) above the floor surface....
-
1132A.4.1 Thresholds
Thresholds at the primary entry and required exit doors shall be no higher than ½ inch (12.7 mm)....
-
703.3 Braille
703.3 Braille. Braille shall be contracted (Grade 2) and shall comply with 703.3 and 703.4.
-
11B-703.7.2.5 Cleaner Air Symbol
Rooms, facilities and paths of travel that are accessible to and usable by people who are adversely impacted by airborne chemicals or particulate(s) and/or the use of electrical...
-
11B-703.6.1 Pictogram field
Pictograms shall have a field height of 6 inches (152 mm) minimum. Characters and Braille shall not be located in the pictogram field. Advisory 11B-703.6.1 Pictogram field. ...
-
Signs
Signs. Section 216.10 of the 2010 Standards requires each covered assembly area to provide signs at each auditorium to inform patrons that assistive listening systems are available....
-
703.6.1 Pictogram Field
703.6.1 Pictogram Field. Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field. Figure...
-
11B-216.13.2 Removal of Cleaner Air Symbol
If the path of travel, room and/or facility identified by the Cleaner Air Symbol should temporarily or permanently cease to meet the minimum conditions of use identified in Section...
-
11B-216.13.1 Use of Cleaner Air Symbol
Use of the Cleaner Air Symbol is voluntary. Where publicly funded facilities or any facilities leased or rented by the State of California, not including concessionaires, comply with...
-
11B-216.13 Cleaner Air Symbol
[See subsections ...]
-
11B-703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with Sections 11B-703.3 and 11B-703.4. Advisory 11B-703.3 Braille. Contracted Braille uses special characters called...
-
703.2 Raised Characters
Raised characters shall comply with 703.2 and shall be duplicated in braille complying with 703.3. Raised characters shall be installed in accordance with 703.4. Advisory 703.2...
-
703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with 703.3 and 703.4.
-
703.6.1 Pictogram Field
Pictograms shall have a field height of 6 inches (150 mm) minimum. Characters and braille shall not be located in the pictogram field. Figure 703.6.1 Pictogram Field
-
703.3 Braille
Braille shall be contracted (Grade 2) and shall comply with 703.3 and 703.4.
-
703.7.2.4 Assistive Listening Systems
Assistive listening systems shall be identified by the International Symbol of Access for Hearing Loss complying with Figure 703.7.2.4.
-
R211.1 General
R211.1 General. Signs shall comply with R211. Where audible sign systems and other technologies are used to provide information equivalent to the information contained on pedestrian...
-
T702.6 Character Spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces. Spacing between individual characters shall be 10 percent minimum...