The high tide mark is a reasonable location to stop constructed features; they are much more likely to wash out below this point....
Search Results "High Drinking Fountain"
-
Getting to the Water—Beach Access Routes
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side with a drop off....
-
A4.6.4 Signage
Signs designating parking places for disabled people can be seen from a driver’s seat if the signs are mounted high enough above the ground and located at the front of a parking space....
-
A4.6.4 SIGNAGE
Signs designating parking places for disabled people can be seen from a driver's seat if the signs are mounted high enough above the ground and located at the front of a parking space....
-
What other surface considerations affect wheelchair travel?
If the rolling resistance of flooring is high, wheelchair users must avoid those areas or expend extra energy maneuvering across the surface....
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
11B-1005.3 Edge protection
Extending the deck of the fishing pier or platform 12 inches (305 mm) where the 34 inch (865 mm) high railing is provided is an alternative design, permitting individuals using wheelchairs...
-
§ 38.159(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.95(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
3.3.6 Knee Clearance Height, minimum
Smaller individuals who have large thighs, those with high seats and scooter users also have high lap heights....
-
Common Problems with Signs
Common Problems with Signs Ø Some signs – such as permanent room signs – are required to have Braille, high contrast, and raised lettering and must be located on the wall to the...
-
11B-904.4.2 Forward approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
-
Problem Two (Entrance)
Problem Two: The entrance door threshold is one inch high....
-
Signage
• Precise directional and informational signage in high-contrast colors with clear, large type and good lighting make shopping more comfortable for people with diminished short-term memory...
-
Printed materials
• Printed programs, advertisements, and brochures with large, clear type, in high contrast colors on solid backgrounds on satin- or matte-finish paper are more legible for people with...
-
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry platforms....
-
5. If there is a significant risk, reasonable accommodation must be considered
For example: A deaf bus mechanic was denied employment because the transit authority feared that he had a high probability of being injured by buses moving in and out of the garage....
-
Section I: Elevators
(§407.4.1) I3 Are hallway elevator call buttons 48" high or lower?...
-
M302.2.1 Adjustability (Section-by-Section Analysis)
rule the Access Board has renamed this provision and now requires the transfer surface to be adjustable to: (1) a low transfer position height at or between 17 inches and 19 inches; (2) a high...
-
M305.3.2 Height (Section-by-Section Analysis)
For vertical supports, the MDE NPRM proposed that the bottom end of the support be 34 inches high minimum and 37 inches high maximum above the standing surface....