Outside diameter of bar is 1 1/4" and is heliarc welded to mounting flange. Bar has a capped end that is welded and ground smooth to match the finish of the tubing....
Search Results "Handrail Diameter"
Filters
Commonly Searched Documents
-
AJW Architectural Products US11 Security Toilet Tissue Holder, Exposed Mounting - Surface Mounted
-
Altered Rides
controlled or operated by the rider (such as bumper cars and go-carts) are not required to comply with the guidelines, but an accessible route to the ride and a turning space (60-inch diameter...
-
Bonded Bridle Path Installation
With a known weight of EWF at an application proportion of 30%, 19 L (5 gal) of binder was applied by moving a perforated bucket (holes 6 mm (0.2 in.) in diameter) quickly over the surface...
-
Grab Bars
They must also comply with the size, strength, finish, and position requirements in ABAAS, section 609 as follows: Grab bars with circular cross sections must have a diameter no...
-
Single-User Toilet Rooms: Side Transfer Space
Turning space can be provided in the form of a 60 inch diameter circle (as shown) or T-shaped space. Doors must comply with 4.13, which specifies maneuvering clearances....
-
406 Curb Ramps
revised to: clarify requirements for cross slope (406.1) modify specifications for side flares (406.3) and landings (406.4) delete unnecessary language concerning handrails...
-
Grab Bar Cross Sections
For consistency with specifications for handrails, the Board has revised requirements for size (609.2) and spacing (609.3)....
-
American Specialties Circular Counter Top Waste Chute 1000
Counter Opening: 5 3/4" (146 mm) diameter....
-
Guidelines for Requirement 2
Other commenters indicated confusion concerning when handrails are required. A few commenters stated that the installation of handrails limits access to lawn areas. Response....
-
American Specialties Surface Mounted Twin Hide-A-Roll Toilet Tissue Dispenser 0030
Holds two rolls up to 5 1/4" (135 mm) diameter (1800 sheets). Top roll automatically drops in place when bottom roll is used up. Type 304 stainless steel cabinet and mechanism....
-
Bobrick ClassicSeries Toilet Tissue Dispenser for Two Rolls B-2740
Holds two rolls up to 6" (150mm) diameter (2000 sheets). Unit 12 1⁄2" (320mm) wide, proj. 4 7⁄8" (125mm) from wall. No controlled delivery....
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 24
For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
Bobrick Extra-Heavy-Duty Surface-Mounted Towel Bar B-530 x 18
For use in hospital and hotel bathrooms. 1" (25mm) diameter bar is 18-gauge (1.2mm), type 304 stainless steel, satin finish. Mounting with snap flange....
-
Bobrick ClassicSeries Toilet Tissue Dispenser for Single Roll B-2730
Holds one roll up to 6" (150mm) diameter (2000 sheets). Unit 6 1/2" (165mm) wide, proj. 4 7⁄8" (125mm) from wall. No controlled delivery....
-
Gamco Recessed Toilet Tissue Holder - 212
Capacity: Holds standard core toilet tissue roll up to 5-1/4" (133mm) diameter. Unit 6 3/8" W, 6 3/8" H (162 x 162mm)....
-
American Specialties Dual Roll Surface Mounted Toilet Paper Holder 7305-2
Dual Roll Surface Mounted Toilet Paper Holder unit shall hold and dispense two (2) rolls of standard core roll tissue up to 5- 1/2" (140mm) diameter....
-
City of XXX – ADA Transition Plan
Target Date Person Responsible Cost Estimate Source of Fund South Entrance ramp 1:9 slope, cracks, square handrails...
-
1. Accessible route(s)
Handrails are not required on these accessible walks....
-
C. Chapter 2: Scoping Requirements
subsections to a single section (former T203), in the final rule, each discrete feature or set of related requirements—such as, steps (T203), doorways (T204), illumination (T205), and handrails...
-
Maneuvering Clearances at Doors [4.13.6]
However, limited projections, such as wall-mounted handrails are permitted to overlap clearances....
-
Mockett TBR1-SSS Wall Mounted Toilet Brush Holder
Size: 4 15/16" high, 3 1/2" diameter. Mounting hardware included. Finish: Stainless Steel cup and brush handle; Black plastic liner....
-
Mockett CH11 Longhorn Coat Hook
Size: 5 9/32" wide, 1 31/32" base diameter, 1 25/32" projection. Mounting hardware included. Finish: Base is Polished Chrome....
-
Bobrick Heavy-Duty Clothes Hook B-211
Flange diameter: 2 3⁄4" (70mm). Unit projects 3 7⁄16" (85mm)....
-
Roughness Calculation
The diameter and flexibility of the wheel also will determine how far down into the gap the wheel will travel....
