The parking space requirements of Sections 11B-208 and 11B-502 apply to facilities with valet parking, including the requirement for an accessible route of travel to the entrance of the...
Search Results "Travel Distance"
Filters
Commonly Searched Documents
-
11B-209.4 Valet parking
-
11B-705.1.2.2.2.1 One entrance/exit point
inches (914 mm) deep, as measured perpendicular to the curb, and the turning space shall provide a minimum 36 inches (914 mm) wide portion without detectable warnings to allow pedestrian travel...
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
Gates, Bars, and Berms
Forest Service-constructed barriers on pedestrian travel routes must have a 32-inch minimum width gap or include a route beside them that will permit passage of a wheelchair....
-
12162(a)(4)(B)(ii)
which to eat, shall be provided to ensure that other equivalent food service is available to individuals with disabilities, including individuals who use wheelchairs, and to passengers traveling...
-
2.8 Openings
Where possible, elongated openings should be placed perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
-
§ 37.167(h)
(h) The entity shall not prohibit an individual with a disability from traveling with a respirator or portable oxygen supply, consistent with applicable Department of Transportation rules...
-
Lines of Sight for Wheelchair Spaces
Comment was sought on whether the term "varying distances" provides sufficient guidance in achieving dispersion (Question 41)....
-
11B-208.3.2 Residential facilities
accordance with Section 11B-208.2.3.2 shall not be required to be dispersed throughout all types of parking if substantially equivalent or greater accessibility is provided in terms of distance...
-
Protruding Objects and Trails
Objects that extend into the travel way of a trail from the side or from overhead can be hazardous to people who are paying more attention to their companions than the travel route (figure...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
R302.7.3 Horizontal Openings
Elongated openings in gratings shall be placed so that the long dimension is perpendicular to the dominant direction of travel....
-
6.10 Openings
Where possible, elongated openings should be placed perpendicular, or as close to perpendicular as possible, to the dominant direction of travel....
-
§ 37.123(e)(2)(i)
(i) An individual is eligible under this paragraph with respect to travel on an otherwise accessible route on which the boarding or disembarking location which the individual would use is...
-
Notes
., with a fixed vertical distance between the seat and footplate)....
-
RESULTS OF OBJECTIVE SURFACE MEASUREMENT
It is recommended that these surfaces be considered moderately firm and stable, and be suitable for use in level areas for a limited distance (e.g., around a campsite) or for shorter distances...
-
1. Background
A study has shown that people in Pittsburgh who use power WCs as their primary mode of transportation will travel 1.6 km on a normal day....
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (815 mm) minimum for a distance of 24 inches (610 mm) maximum provided...
-
Amusement Ride Seats Designed for Transfer
When greater distances are required for transfer, consideration should be given to providing gripping surfaces, seat paddings, and avoiding sharp or protruding objects....
-
5.2.1.3 Transfer Surface Size Recommendations for Stretchers (M301)
The patient would not use the short end as the point of entry because it would require the patient to slide a long distance to lie on the stretcher....
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (815 mm) minimum for a distance of 24 inches (610 mm) maximum provided...
-
308.2.2 Obstructed High Reach
Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction....
-
1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be permitted to be reduced to 32 inches (815 mm) minimum for a distance of 24 inches (610 mm) maximum provided...