A floor space 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum shall be provided centered on the lavatory....
Search Results "Vehicle Pull-Up Space"
Filters
Commonly Searched Documents
-
11B-809.10.8.2 Floor space
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
T203 Steps
[See subsections ...]
-
T502 Doorways
[See subsections ...]
-
T503 Illumination
[See subsections ...]
-
T205 Illumination
[See subsections ...]
-
Sec. 12145. Temporary relief where lifts are unavailable. [Section 225]
[See subsections ...]
-
§ 38.23(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchair and mobility aid users.
-
§ 38.23(d) Securement devices
(d) Securement devices—
-
§ 38.23(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.23(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground level with a lift occupant, and raising and stowing the empty lift if the...
-
§ 38.23(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off.
-
§ 38.27(b)
(b) Each securement location shall have a sign designating it as such.
-
§ 38.83(b)(4) Power or equipment failure
(4) Power or equipment failure. Lift platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or...
-
§ 38.83(b)(10) Platform movement
(10) Platform movement. No part of the platform shall move at a rate exceeding 6 inches/second during lowering and lifting an occupant, and shall not exceed 12 inches/second during...
-
§ 38.83(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
502.7 Relationship to Accessible Routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-305.6 Approach
One full unobstructed side of the clear floor or ground space shall adjoin an accessible route or adjoin another clear floor or ground space....
-
Hager Companies Square Corner Rounded Bevel Pull Plate 103G
Square Corner Rounded Bevel Pull Plate 103G Description: - Square Corner Rounded Bevel - 100T plate - 3G pull Materials: - Aluminum, brass, bronze, stainless steel...
-
Hager Companies Square Corner Rounded Bevel Pull Plate 103E
Square Corner Rounded Bevel Pull Plate 103E Description: - Square Corner Rounded Bevel - 100T plate - 3E pull Materials: - Aluminum, brass, bronze, stainless steel...
-
Hager Companies Square Corner Rounded Bevel Pull Plate 109J
Square Corner Rounded Bevel Pull Plate 109J Description: - Square Corner Rounded Bevel - 100T plate - 9J pull Materials: - Aluminum, brass, bronze, stainless steel...
