Cast Door Pull Materials: - Brass Certification: - Meets ANSI A156.6 for J401 Pulls...
Search Results "Vehicle Pull-Up Space"
- Hager Companies Cast Pull P8N
-
Clear Floor or Ground Space [§305]
Clear Floor or Ground Space [§305] Sufficient clear floor or ground space is required at accessible controls, operable parts, drinking fountains, lavatories and sinks, ATMs and fare machines...
- Hager Companies Door Pull 974B
- Hager Companies Cast Pull 8N
- Trimco 1102 Series Cast Pull
-
WHEELCHAIR SPACE
WHEELCHAIR SPACE. A space for a single wheelchair and its occupant....
-
Wheelchair Space
Wheelchair Space. Space for a single wheelchair and its occupant....
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
Space Needs
and 2) the physical locations of these spaces relative to the first platform....
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
- Hager Companies Cast Door Pull 20N
-
ACCESSIBLE SPACE
ACCESSIBLE SPACE. [DSA-AC] A space that complies with the accessibility provisions of this code....
- Hager Companies Security Pull T4E
-
Section 37.165 Lift and Securement Use
An entity's vehicle is not required to pick up a wheelchair user when the securement locations are full, just as the vehicle may pass by other passengers waiting at the stop if the bus is...
-
Appropriate clear floor space
Appropriate clear floor space (shown by dashed lines) is needed adjacent to each cell feature (see page 1 diagrams on clear floor space)....
- HEWI Stainless Steel Pull Handles
-
§ 38.53(a)(1)
(1) Passenger doorways on vehicle sides shall have clear openings at least 32 inches wide when open....
- Hager Companies Square Pull Plate 34J
-
11B-304 Turning space
[See subsections ...]
-
11B-304 Turning space
[See subsections ...]
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
- Hager Companies Square Pull Plate 34L
- Hager Companies Security Pull P4E