Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
Search Results "Push Side"
Filters
Commonly Searched Documents
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
Issue 6: Pre-timed signals (an APS is more than a pushbutton)
information provided by the APS unit: the vibrotactile WALK; the tactile arrow for wayfinding; tactile mapping; if provided, and messages and actions available with an extended button push...
-
Bobrick Accessibility Video -- Design for Turning Radiuses
Push Girl Mia with the architect's help shows how to design an accessible restroom. See www.bobrick.com for more info!...
-
11B-604.8.1.4 Toe clearance
At least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side face of the partition...
-
Corbin Russwin Inc. DC5000 Series Cam Action Door Closer
operating efficiency Slide track standard Adjustable spring size 1 through 6 Adjustable closing force Adjustable closing and latching speed Backcheck standard Non-handed Push...
-
ELKAY Filtered EZH2O® Bottle Filling Station with Integral Soft Sides® Fountain LZWS-EDFP217K Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
Disinformation Corridor Exhibit
The force required to push or pull open the red door leading out of the exhibit is 15 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
Rising Sun Exhibit
The force required to push or pull open the painted door leading out of the exhibit is 14 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
Detail View – Accessible Round Set-Up
In other words, the chairs should not be pushed under the tables. Click [here] ... for a full-page, printable handout....
-
39. Must an employer provide a reasonable accommodation that is needed because of the side effects of medication or treatment related to the disability, or because of symptoms or other medical conditions resulting from the underlying disability?
The side effects caused by the medication that an employee must take because of the disability are limitations resulting from the disability....
-
Doorways without Doors or Gates, Sliding Doors, and Folding Doors: ADA Standard Section 404.2.4.2
Section 404.2.4.2 covers the current ADA Standards for maneuvering clearances at doorways without doors or gates, sliding doors, and folding doors.
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
MINIMUM MANEUVERING CLEARANCE Approach direction Perpendicular to doorway Parallel to doorway (beyond stop/latch side...
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the restrooms' vestibule doors is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf. See Standards § 4.13.11(2)(b). v....
-
g-iv
Is no more than 5 pounds force needed to push or pull open the door?...
-
On-Board Wheelchairs
equipped with specific features and be designed to be compatible with the maneuvering space, aisle width, and seat height of the aircraft on which they are to be used, and to easily be pushed...
-
A4.12.2 Window Hardware
Windows requiring pushing, pulling, or lifting to open (for example, double-hung, sliding, or casement and awning units without cranks) should require no more than 5 lbf (22.2 N) to open...
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall...
-
1. Faucets
Lever-operated, push-type mechanisms, and U-shaped handles are acceptable designs....
-
Issue 3: Which signal? Speech WALK messages necessary
In Figure 6, it appears that the required APS separation (10 feet minimum) could have been achieved here by locating stub poles to the left side of the left ramp and the right side of the...
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.5.3
Section 608.5.3 covers the current ADA Standards for controls in alternate roll-in type shower compartments.
-
11B-608.2.2 Standard roll-in type shower compartments
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
11B-608.2.2.1 Clearance
[2010 ADA Standards] EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the...
-
Transfer Space: ADA Standard Section 1008.3.1.3
The 48 inch (1220 mm) long minimum dimension of the transfer space shall be centered on and parallel to the 24 inch (610 mm) long minimum side of the transfer platform....
