Section 608.2.3 covers the current ADA Standards for the size and clearances of alternate roll-in type shower compartments.
Search Results "Push Side"
Filters
Commonly Searched Documents
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.2.3
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
4. Pressure Gauge
Many people with disabilities have limitations on the amount of force they can exert to open a door or operate a device that requires pushing or pulling....
-
g-ii
., lever, pull, push, panic bar) usable with one hand, without tight grasping, pinching, or twisting of the wrist, to allow people who may not be able to easily use one or both hands to...
-
11B-805.4.1 Beds, exam tables, procedure tables, gurneys and lounge chairs
A 36 inch (914 mm) minimum wide clear space shall be provided along the full length of each side of beds, exam tables, procedure tables, gurneys and lounge chairs....
-
Dyson Airblade V Hand Dryer Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bradley Towel Dispenser 250-15 Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bradley MG Terreon Waste Receptacle Side Elevation
Requires the Premium User plan or above. (Login or upgrade your account!) -
Kickplates
Kickplates Recommendation: Some people with disabilities may use walkers or wheelchair footrests to push through doors, particularly those with closers....
-
Transfer Space: ADA Standard Section 1009.5.2
by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall be centered along a 24 inch (610 mm) minimum side...
-
11B-1009.5.2 Transfer space
by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall be centered along a 24 inch (610 mm) minimum side...
-
11B-1008.3.1.3 Transfer space
The 48 inch (1219 mm) long minimum dimension of the transfer space shall be centered on and parallel to the 24 inch (610 mm) long minimum side of the transfer platform....
-
Location: ADA Standard Section 604.2
Section 604.2 covers the current ADA Standards for the mounting location of water closets.
-
1134A.5, Item 3
Lever operated, push type and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.5, Item 3
Lever operated, push type and electronically controlled mechanisms are examples of acceptable designs....
-
11B-221.2.3.1 Horizontal dispersion
In row seating, two wheelchair spaces shall be permitted to be located side-by-side. Advisory 11B-221.2.3.1 Horizontal dispersion....
-
Attachment G: Modifications to Newly Constructed Facilities
Attachment G: Modifications to Newly Constructed Facilities
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
1134A.6, Item 6
Lever operated, push-type and electronically controlled mechanisms are examples of acceptable designs....
-
Rear Wall: ADA Standard Section 604.5.2
Section 604.5.2 covers the current ADA Standards for rear wall grab bars that are used for water closets.
-
Visually IMpaired Accessible Keypad Door Lock
Ran into an interesting issue in a claim by a visually impaired plaintiff The claim was that the push button keypad was not accessible for a visually impaired person - see attached photo...
-
Norton Surface Mounted 5900 Series Low Energy Door Operator
This cost-effective operator is available for either push- or pull-side mounting and is ideal for any application designed to meet the Americans with Disabilities Act (A.D.A)....
-
1008.1.9.7, Item 5
A sign shall be provided on the door located above and within 12 inches (305 mm) of the release device reading: “KEEP PUSHING....
