The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
Search Results "Expected Maximum Flight Duration"
Filters
Commonly Searched Documents
-
11B-406.5.7 Cross slope
-
§382.123(a)(1)
., the items were placed there on a previous leg of the flight)....
-
Qualified Individual with a Disability
on an carrier”; or (3) “purchases or possesses a valid ticket for air transportation on an carrier and presents himself or herself at the airport for the purpose of traveling on the flight...
-
What about the passenger who has two or more service animals?
You may offer the passenger a seat on a later flight if the passenger and animals cannot be accommodated together at a single passenger seat....
-
If Passenger with a Disability Requests Private Screening
However, if a passenger with a disability requests a private security screening in a timely manner, you must provide it in time for the passenger to board the flight....
-
C.1. - Who within the agency is responsible for ensuring EIT purchases comply with Section 508?
It is expected that agencies will designate requiring activity officials in their organizations to carry out these responsibilities at an appropriately accountable level....
-
Frequency: ADA Standard Section 407.4.8.2.3
Section 407.4.8.2.3 covers the current ADA Standards for the frequency of audible elevator car indicators.
-
Stroke Thickness: ADA Standard Section 703.2.6
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
11B-703.2.6 Stroke thickness
Stroke thickness of the uppercase letter “I” shall be 15 percent maximum of the height of the character....
-
11B-407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum....
-
6. Conclusion
The Board expects this proposed rule to be a major step toward ensuring that ICT is more accessible to and usable by individuals with disabilities—both in the federal workplace and society...
-
11B-608.5.3 Alternate roll-in type shower compartments
shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum and 27 inches (686 mm) maximum...
-
Question 2
The Access Board is expected to promulgate design standards for medical and dental diagnostic tables and chairs....
-
Title and label placement
Title and label placement Everyone expected the title to be at the top and center of the map....
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
Spout Height: ADA Standard Section 602.4
Section 602.4 covers the current ADA Standards for the spout height of drinking fountains.
-
11B-602.4 Spout height
Spout outlets shall be 36 inches (914 mm) maximum above the finish floor or ground....
-
Accessible Routes: ADA Standard Section 1007.2
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
Users and Needs
Generally, the severity of disability was expected to increase as a higher level of care was provided....
-
Service Animal Issues
If a flight is totally filled, there would not be any seat available to buy....
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...