Exception: In assembly seating where the maximum viewing distance is 100 feet (30.5 m) or greater, the height of the uppercase “I” of low resolution VMS fonts shall be permitted to be 1...
Search Results "Expected Maximum Flight Duration"
-
11B-703.8.4 Character height
-
PUBLIC HOUSING
social service establishments; Transient lodging, such as hotels, motels, hostels and other facilities providing accommodations of a short term nature of not more than 30 days duration...
-
Nosings: ADA Standard Section 504.5
Section 504.5 covers the current ADA Standards for stair nosings.
-
§ 37.169(b)(3)
(3) Whenever feasible, requests for modifications shall be made and determined in advance, before the transportation provider is expected to provide the modified service, for example, during...
-
§ 37.169(b)(3)
(3) Whenever feasible, requests for modifications shall be made and determined in advance, before the transportation provider is expected to provide the modified service, for example, during...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
31. Must an employer provide a reassignment if it would violate a seniority system?
Seniority systems governing job placement give employees expectations of consistent, uniform treatment expectations that would be undermined if employers had to make the type of individualized...
-
Battery-powered Wheelchairs
[Sec. 382.41(g)] Carriers may require that a passenger with a disability wishing to have a battery-powered wheelchair transported on a flight (including in the cabin where required) check...
-
Back Wall: ADA Standard Section 607.4.1.1
Section 607.4.1.1 covers the current ADA Standards for back wall grab bars in bathtubs with permanent seats.
-
Fur out the wall
The centerline of the water closet shall be 16 inches (405 mm) minimum to 18 inches (455 mm) maximum from the side wall or partition, except that the water closet shall be 17 inches (430...
-
Who has to follow part 382?
., ticket and gate agents, flight attendants, baggage handlers, pilots, etc.); (2) authorized agents of an air carrier (e.g., travel agents); (3) organizations and their employees that have...
-
505.10 Handrail Extensions
Handrail gripping surfaces shall extend beyond and in the same direction of stair flights and ramp runs in accordance with 505.10. EXCEPTIONS: 1....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
- BEA Inc. LZR-Microscan Swinging Door Sensor
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
§ 382.31 Refusal of transportation
(c) A carrier shall not refuse to provide transportation to qualified individuals with a disability by limiting the number of such persons who are permitted to travel on a given flight....
-
Accessibility of Facilities
For flights on aircraft with more than 60 seats that do not have an accessible lavatory, airlines must place an on-board wheelchair on the flight if a passenger with a disability gives the...
-
Implementation Approach and Schedule
challenges of Web site conversion vary greatly among the carriers, it is safe to say that when accessibility is properly integrated into the development process, technical efficiencies can be expected...
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum....
-
Final Regulatory Impact Analysis
Under this set of assumptions, the final rules have an expected NPV of $9.3 billion (7 percent discount rate) and $40.4 billion (3 percent discount rate)....