Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
Search Results "Transfer Wall"
-
11B-234.3 Minimum number
-
1008.4.2 Clear Floor or Ground Space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section 11B-1002.5...
-
1008.4.2 Clear Floor or Ground Space
Where play components include a seat or entry point, designs that provide for an unobstructed transfer from a wheelchair or other mobility device are recommended....
-
Clearances Around Gripping Surfaces
Guidelines specify the following clearances around grab bars to ensure sufficient space for a person to grasp the grab bar: 1½ inches absolute clearance between grab bars and the adjacent wall...
-
4.1.3 Adjustable Height Chairs with and without Footplates
Current chair configuration and anthropometric factors inform the implications of minimum height standards for accessibility of chair transfer surfaces for future designs (Section 5.1.3)...
-
4.21.3 Seat
In a 36 in by 36 in (915 mm by 915 mm) shower stall, the seat shall be on the wall opposite the controls....
-
M305.2.1 Location
Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position....
-
Ceiling Mounted Lifts
Assisted Transfer with Ceiling Mounted Overhead Track Lift 1. Ceiling structure must support weight of lift and person 2....
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the transfer...
-
Location and Size
The transfer support would be located on the side of the transfer surface that is opposite the transfer side (see M301.2.3 and M302.2.3) similar to the provisions in the 2004 ADA and ABA...
-
EXHIBIT 1 JEFFERSON OUTPATIENT IMAGING ADA POLICY AND PROCEDURE
When a patient with a mobility impairment or other disability seeks assistance with transferring to imaging equipment or examination tables, Jefferson Outpatient will safely assist the patient...
-
M305.2.3 Height (Section-by-Section Analysis)
transfer surface would be usable by patients with disabilities....
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed transfer surface...
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable.
-
M302.3 Supports (Section-by-Section Analysis)
This is an introductory section. An editorial change was made to this section as a result of the change in M302.3.2, described below, to replace the word “stirrups” with the term...
-
1014.2.1.1.1 Surface
The surface of the clear ground space shall be firm and stable.
-
Guest Rooms with Mobility Features: ADA Standard Section 224.2
Section 224.2 covers scoping requirements in the current ADA Standards for transient lodging guest rooms with mobility features.
-
4.21.3 SEAT
The seat shall be on the wall opposite the controls. The structural strength of seats and their attachments shall comply with 4.26.3....
-
Using Patient Lifts
Using Patient Lifts Medical providers may need a lift in order to transfer some patients safely onto an exam table....
-
Results
[See subsections ...]