(1) Wall- and post-mounted cantilevered units shall have a clear knee space between the bottom of the apron and the floor or ground at least 27 in (685 mm) high, 30 in (760 mm) wide,...
Search Results "Toe Clearance"
Filters
Commonly Searched Documents
-
4.15.5(1)
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the...
-
11B-807.2.3 Beds
Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed. The clear floor space shall be positioned for parallel...
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the...
-
11B-807.2.3 Beds
Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed. The clear floor space shall be positioned for parallel...
-
Plan 4B: 13-Foot Wide Accessible Guest Room
); • Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe...
-
Plan 3B: 12-Foot Wide Accessible Guest Room
); • Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe...
-
Plan 2A: 13-Foot Wide Accessible Guest Room
); • Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe...
-
M301.4 Lift Compatibility (Section-by-Section Analysis)
in base (proposed M301.4.1) or clearance around base (proposed M301.4.2) technical requirements....
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
The vertical clearance at doorways with lifts, ramps or bridgeplates shall comply with T502.2....
-
Single-User Toilet Rooms: Side Transfer Space
Knee and toe clearances below fixtures can overlap turning space, although this should be limited where the space is confined to the minimum (see page 15)....
-
Plan 4A: 13-Foot Wide Accessible Guest Room
); • Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe...
-
11B-404.2.4.4 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall comply with Section 11B-302....
-
809.2.5 Bedrooms in Emergency Transportable Housing Units
Where bedrooms are less than 70 square feet, the section specifies that the furniture supplied with the unit cannot overlap the accessible route, maneuvering clearances required at doors...
-
Plan 2B: 13-Foot Wide Accessible Guest Room
); • Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe...
-
M301.4.1 Clearance in Base
[See subsections ...]
-
§ 38.23(b)(13) Handrails
Handrails shall be placed to provide a minimum 11⁄2 inches knuckle clearance from the nearest adjacent surface....
-
§ 38.125(b)(13) Handrails
Handrails shall be placed to provide a minimum 11/2 inches knuckle clearance from the nearest adjacent surface....
-
1. Transfer Supports
transfer support required; has added new technical requirements for height (M305.2.3), cross section (M305.2.4), absence of surface hazards (M305.2.5), gripping surfaces (M305.2.6), and clearance...
-
SafePath: Overview of Ramps and Reducers for ADA Compliance by SafePath Products
A short video that show new "green" technology and products for ADA disability and "handicap" access for doors and flooring systems. SafePath™ Products has been in business since...
-
1132A.5.1 General
Section 1126A.3 shall apply to maneuvering clearances at the side of the door exposed to common or public use spaces. ...
-
§ 38.115(a)
Handrails shall be placed to provide a minimum 11/2 inches knuckle clearance from the nearest adjacent surface....
-
M301.4.2 Clearance Around Base
[See subsections ...]
-
§ 38.159(b)(13) Handrails
Handrails shall be placed to provide a minimum 11/2 inches (38 mm) knuckle clearance from the nearest adjacent surface....
