Accessible lavatories and sinks must provide knee and toe clearance for a forward approach (606.2)....
Search Results "Knee Clearance"
-
Knee and Toe Clearance
-
J1
J1. If the drinking fountain is a wall-mounted unit, is there clear floor space at least 30 inches wide (36 inches if it is in an alcove) x 48 inches long in front of the drinking...
-
305.4 Knee and Toe Clearance
305.4 Knee and Toe Clearance. Unless otherwise specified, clear floor or ground space shall be permitted to include knee and toe clearance complying with 306....
-
J6
J6. Is the bottom of the apron of the fountain 27 inches above the floor so that it provides the space needed for a person who uses a wheelchair to pull up under it but is not a...
-
306 Knee and Toe Clearance
306 Knee and Toe Clearance...
-
306.3 Knee Clearance
306.3 Knee Clearance....
-
K3
In each eating area, if tables with fixed seats are provided, do at least 5% of each type of table with fixed seats have accessible locations with knee space at least 27 inches high, at...
-
Figure M5: Overview of M303 Diagnostic Equipment for Use by a Patient While Seated in a Wheelchair and 304 Diagnostic Equipment for Use by a Patient in a Standing Position (Mammography Machine Example)
Where the primary use of the equipment supports more than one patient position, it must comply with the requirements for each use. The mammography machine is usable by both people...
-
1. Desk size
To provide adequate knee and leg clearance, desks and writing tables need to have at least 30 inches of knee width, 29 inches of knee height, and 19 inches of leg depth....
-
M9
Does the lavatory have at least a 29-inch-high clearance under the front edge and the top of the rim no more than 34 inches above the floor?...
-
Check-Out Aisles and Sales and Service Counters
These commenters believed that the knee and toe clearance requirements will cause a reduction in the sales and inventory space at check-out aisles and other sales and service counters....
-
Accessible Courtroom Stations
Other applicable specifications include accessible work surface heights and toe and knee clearance....
-
304 Turning Space
Section 304.3 permits turning space to include knee and toe clearance complying with section 306....
-
4.3.4 Knee and Toe Clearances
For example, the ADA-ABA has a sloped line indicating the depth of knee clearance at the plane of the knees and the depth somewhere above the ankles....
-
11B-805 Medical care and long-term care facilities
Knee clearance requirement - All accessibility requirements of Section 11B-606 apply to lavatories, sinks, and handwashing fixtures required to be accessible....
-
4.4 Knee and Toe Clearances
4.4 Knee and Toe Clearances Knee and toe clearances of the four sets of standards are roughly comparable....
-
304.3.1 Circular Space
The space shall be permitted to include knee and toe clearance complying with 306....
-
304.3.2 T-Shaped Space
The space shall be permitted to include knee and toe clearance complying with 306 only at the end of either the base or one arm. Figure 304.3.2 T-Shaped Turning Space...
-
R404.4 Knee and Toe Clearance
R404.4 Knee and Toe Clearance. Unless otherwise specified, clear spaces shall be permitted to include knee and toe clearance complying with R405....
-
R405 Knee and Toe Clearance
R405 Knee and Toe Clearance...
-
R405.1 General
Clearances are measured in relation to the usable clear space, not necessarily to the vertical support for an element....
-
R405.3 Knee Clearance
R405.3 Knee Clearance...
-
R405.3.1 General
Space under an element between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface shall be considered knee clearance and shall comply with R405.3....
-
R405.3.2 Maximum Depth
Knee clearance shall extend 635 mm (2.1 ft) maximum under an element at 230 mm (9 in) above the finish surface....