III−4.4200 Readily achievable barrier removal. Public accommodations are required to remove barriers only when it is "readily achievable" to do so....
Search Results "Barrier Wall"
Filters
Commonly Searched Documents
-
III-4.4200 Readily achievable barrier removal
-
Section 36.304 Removal of Barriers (Preamble, Section-by-Section Analysis)
Section 36.304 Removal of Barriers Section 36.304 requires the removal of architectural barriers and communication barriers that are structural in nature in existing facilities, where...
-
Section 36.304 Removal of Barriers (Section-By-Section Analysis and Response to Comments)
Section 36.304 Removal of Barriers (Section-By-Section Analysis and Response to Comments) Section 36.304 requires the removal of architectural barriers and communication barriers that...
-
Security Barriers [§206.8]
Security Barriers [§206.8] Security bollards and screening devices at accessible entrances cannot obstruct accessible routes or accessible means of egress....
-
Rear Wall: ADA Standard Section 604.5.2
Section 604.5.2 covers the current ADA Standards for rear wall grab bars that are used for water closets.
-
Architectural Barriers
Architectural Barriers....
-
Spas: ADA Standard Section 242.4
Section 242.4 covers scoping requirements in the current ADA Standards for spas.
-
11B-242.4 Spas
Accessible means of entry shall comply with swimming pool lifts complying with Section 11B-1009.2; transfer walls complying with Section 11B-1009.4; or transfer systems complying with Section...
-
Examples of Barrier Removal
Examples of Barrier Removal The following examples illustrate common barriers and suggest solutions that may be readily achievable....
-
III-4.4000 Removal of barriers
[See subsections ...]
-
§ 36.304 Removal of barriers.
[Order No. 1513-91, 56 FR 35592, July 26, 1991, as amended by AG Order No. 3181-2010, 75 FR 56254, Sept. 15, 2010; AG Order No. 3332-2012, 77 FR 30179, May 21, 2012]
-
709.4 Continuity
Smoke barriers shall form an effective membrane continuous from outside wall to outside wall and from floor slab to floor or roof deck above, including continuity through concealed spaces...
-
607.4.2.2 Control End Wall
607.4.2.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
607.4.1.2 Control End Wall
607.4.1.2 Control End Wall. A grab bar 24 inches (610 mm) long minimum shall be installed on the control end wall at the front edge of the bathtub....
-
607.4.2.3 Head End Wall
607.4.2.3 Head End Wall. A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...
-
11B-404.2.7 Door and gate hardware
Access gates in barrier walls and fences protecting pools, spas, and hot tubs shall be permitted to have operable parts of the release of latch on self-latching devices at 54 inches (1372...
-
11B-404.2.7 Door and gate hardware
Access gates in barrier walls and fences protecting pools, spas, and hot tubs shall be permitted to have operable parts of the release of latch on self-latching devices at 54 inches (1372...
-
General: ADA Standard Section 1009.1
Where provided, pool lifts, sloped entries, transfer walls, transfer systems, and pool stairs shall comply with 1009....
-
11B-1009.1 General
Where provided, pool lifts, sloped entries, transfer walls, transfer systems, and pool stairs shall comply with Section 11B-1009....
-
Figure 1009.4.3 Depth and Length of Tranfer Walls – Drawing from the U.S. Access Board
-
404.2.7 Door and Gate Hardware
Access gates in barrier walls and fences protecting pools, spas, and hot tubs shall be permitted to have operable parts of the release of latch on self-latching devices at 54 inches (1370...
-
404.2.7 Door and Gate Hardware
Access gates in barrier walls and fences protecting pools, spas, and hot tubs shall be permitted to have operable parts of the release of latch on self-latching devices at 54 inches (1370...
-
404.2.7 Door and Gate Hardware
Access gates in barrier walls and fences protecting pools, spas, and hot tubs shall be permitted to have operable parts of the release of latch on self-latching devices at 54 inches (1370...
-
11B-607.2 Clearance
Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub....
