Surfaces of transfer walls shall not be sharp and shall have rounded edges....
Search Results "Barrier Wall"
Filters
Commonly Searched Documents
-
11B-1009.4.4 Surface
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
11B-1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
11B-206.8 Security barriers
Security barriers, including but not limited to, security bollards and security check points, shall not obstruct a required accessible route or accessible means of egress....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
Height
Height The transfer wall height must be 16 inches minimum to 19 inches maximum, measured from the deck....
-
1009.4.2 Height
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
Controls: ADA Standard Section 607.5
Section 607.5 covers the current ADA Standards bathtub controls.
-
11B-607.5 Controls
Controls, other than drain stoppers, shall be located on an end wall....
-
Clear Deck Space: ADA Standard Section 1009.4.1
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
11B-1009.4.1 Clear deck space
A clear deck space of 60 inches (1524 mm) minimum by 60 inches (1524 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
Curb or Barrier: ADA Standard Section 405.9.2
Section 405.9.2 covers the current ADA Standards for a curb or barrier that is provided as edge protection at a ramp.
-
Clear Tread Width [1017.3]
The 36-inch-minimum clear tread width must be maintained for the entire distance of the trail and may not be reduced by gates, barriers, or other obstacles unless a condition for exception...
-
Accessible Routes at Security Barriers
Section 206.8 requires that an accessible route or accessible means of egress be maintained where security barriers or check points are provided....
-
Sec.36.304 Removal of barriers
Sec.36.304 Removal of barriers....
-
Security Barriers: ADA Standard Section 206.8
Section 206.8 covers scoping requirements in the most current ADA Standards for accessible routes through security barriers.
-
202.6 Architectural Barrier Removal
202.6 Architectural Barrier Removal....
-
SECTION 709 SMOKE BARRIERS
SECTION 709 SMOKE BARRIERS...
-
Beginning of National Barrier-Free Standards
Beginning of National Barrier-Free Standards ________________________________________________________________ 1950 In the 1950s, disabled veterans and other people with disabilities...
-
Side Wall: ADA Standard Section 604.5.1
Section 604.5.1 covers the current ADA Standards for side wall grab bars that are used for water closets.