Section 207.1 of the ADA Standards covers information on scoping requirements for accessible means of egress in the most current ADA Standards.
Search Results "Vertical Reference Plane"
-
General: ADA Standard Section 207.1
-
PLATFORM (WHEELCHAIR) LIFT
mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or passengers and (or) luggage or other material a vertical...
-
B. Accessible Route
Is there a route to these 5% accessible fixed tables that allows at least 36" clear width and has no abrupt vertical level changes greater than 1/4"?...
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Resources for Air Travelers with Disabilities
The following publications are useful for air travelers with disabilities: Plane Talk – Passengers with Disabilities, Fly Rights, and New Horizons: Information for the Air Traveler with...
-
I. Parking Garage
Does the parking garage serving the lodging facility allow at least 98" of vertical clearance for vehicles with raised roofs to approach, use and exit the accessible parking spaces?...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
609.8 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the grab bar, fastener, mounting device,...
-
Communication Features in Guest Rooms
As discussed above in section 702, technical requirements for visual alarms in the proposed rule have been replaced with references to criteria in the NFPA 72....
-
382.157 What are carriers obligations for recordkeeping and reporting on disability-related complaints?
The language referring to carriers “covered by this Part” is not intended to change the scope of the existing provision, which refers to carriers conducting passenger operations with at...
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
III-2.0000 INDIVIDUALS WITH DISABILITIES
Regulatory references: 28 CFR 36.104....
-
II-2.0000 QUALIFIED INDIVIDUALS WITH DISABILITIES
Regulatory references: 28 CFR 35.104....
-
II-6.0000 NEW CONSTRUCTION AND ALTERATIONS
Regulatory references: 28 CFR 35.151....
-
II-4.0000 EMPLOYMENT
Regulatory references: 28 CFR 35.140....
-
1118B.3
Changes in level up to 1/4 inch (6.4 mm) may be vertical and without edge treatment [see Figure 11B-5E(c)]....
-
Standing Supports [M305.2]
Standing Supports [M305.2] Recommendation: The final recommendation of the subcommittee is to remove the requirement for standing supports in reference to mammography equipment....
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...