Beach access routes complying with 6.0 shall be provided at developed beach sites as required by 6.0. Beach access routes shall be permanent or removable surfaces. Removable...
Search Results "Vertical Grab Bar"
Filters
Commonly Searched Documents
-
6.1 General
-
6.0 BEACH ACCESS ROUTES
[See subsections ...]
-
Beach Access Route
A continuous, unobstructed path designed for pedestrian use that crosses the surface of a beach or that leads from a pedestrian access point to the high tide level at tidal beaches;...
-
1018.2 Connections
Beach access routes shall connect an entry point to the beach to the: 1. High tide level at tidal beaches; 2. Mean high water level at river beaches; or 3. Normal recreation...
-
4.34.5.5(3) Grab bars
(3) Grab bars. Structural reinforcement or other provisions that will allow installation of grab bars shall be provided in the locations shown in Fig. 49....
-
4.34.5.4(3) Grab bars
(3) Grab bars. Structural reinforcement or other provisions that will allow installation of grab bars shall be provided in the locations shown in Fig. 48....
-
§ 38.125(b)(8) Platform entrance ramp
loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, when measured on level ground, for a maximum rise of 3 inches, and the transition from station platform to ramp may be vertical...
-
Access Board: Multi User Toilet Room Layout
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
Priority 3: Toilet Rooms
Word Fillable Form (2.4MB) Word Non-Fillable Form (2.2MB) PDF Non-Fillable Form (0.7MB)
-
Other Requirements [4.11.2]
The ASME code provides specifications for vertical wheelchair lifts and inclined wheelchair lifts....
-
Chapter 3: Study findings
[See subsections ...]
-
4.34.5.4 BATHTUBS
If a bathtub is provided, then it shall have the following features:
-
6.9
OR b. the measurement of the vertical viewing angle (the angle between a horizontal line from the eye to the screen and a line from the eye to the top of the screen) are within the range...
-
Dune Crossings [1018.10]
The technical requirements for dune crossings do not address the vertical pickets provided in some handrail designs....
-
§ 1194.25(j)
(j) Products which are freestanding, non-portable, and intended to be used in one location and which have operable controls shall comply with the following:
-
Sec.36.308(a)(1)(ii)(A)
(A) Are dispersed throughout the seating area;
-
4.11.3 Entrance
If platform lifts are used then they shall facilitate unassisted entry, operation, and exit from the lift in compliance with 4.11.2.
-
4.11.3 ENTRANCE
If platform lifts are used, then they should facilitate unassisted entry and exit from the lift in compliance with 4.11.2.
-
ASME A18.1 Safety Standard [§410.1]
The ASME A18.1 Standard recognizes two types of platform lifts: vertical platform lifts and inclined platform lifts....
-
Associated
Associated TAS 604.3.2 allows “associated” grab bars, dispensers, sanitary napkin disposal units, coat hooks, and shelves to overlap the required clearance around an accessible water...
-
Attachment J
Provide and maintain a side grab bar that has at least 1½ inches between the grab bar and any other object, such as the toilet paper dispenser. ...
-
4.1.6(1)(f)
(f) If an escalator or stair is planned or installed where none existed previously and major structural modifications are necessary for such installation, then a means of accessible vertical...
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
The vertical clearance at doorways with lifts, ramps or bridgeplates shall comply with T502.2....
-
Lateral grab bar use
The lateral grab bar was used least by subjects for the Adjustable gap protocol and most for the Side guard protocol....
