receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the receptacle outlet box...
Search Results "Raised Boxing Ring"
Filters
Commonly Searched Documents
-
1136A.1 Receptacle heights
-
11B-809.12 Electrical receptacles, controls and switches
communication system receptacles, controls and switches shall be located as follows: Where there is no obstruction, 48 inches (1219 mm) maximum measured from the top of the receptacle box...
-
Non-Tactile Signage
TACTILE NON-TACTILE Character Proportion Font/ Style raised characters: · sans or "simple" serif · upper case only · width-to-height ratios for character...
-
2012 Texas Accessibility Standards (TAS)
Architectural Barriers Texas Government Code, Chapter 469 Administered by the Texas Department of Licensing and Regulation Effective March 15, 2012 Mailing Address P O Box...
-
Customer Premises Equipment (CPE)
Examples of CPE are telephones, routers, switches, residential gateways, set-top boxes, fixed mobile convergence products, home networking adaptors and Internet access gateways which enable...
-
11B-707.9.1.1 Tactilely discernible numerical keypad
A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
-
Sargent Wall and Frame Switch Interface for Door Operators
Office buildings Features 6" x 6" square wall switch with ISA logo and "Press to Open" Momentary SPDT contacts rated at 500ma @ 12VDC or 24VAC Mounts in standard electrical box...
-
11B-703.6 Pictograms
Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
11B-703.6 Pictograms
Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
ETA Opinion: ADA Signage at Exit Doors
§703.2 Raised Characters. Raised characters shall comply with 703.2 and shall be duplicated in Braille complying with 703.3....
-
Keypad Buttons
The proposed rule, in addressing elevator car controls, required that telephone-style keypad buttons, where provided, be identified by raised characters centered on the keypad button (407.2.11.2...
-
A4.1.3(5)
Such conditions generally occur where it is essential to provide access to small raised or lowered areas where space may not be available for a ramp....
-
3) Restaurants
While raised or sunken dining areas must be accessible, inaccessible mezzanines are permitted under certain conditions....
-
11B-703.7 Symbols of accessibility
Symbols of accessibility, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
11B-703.7 Symbols of accessibility
Symbols of accessibility, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
JUST ASK | Sensory Disability Awareness Film
Requires the Registered User plan or above. Login! -
11B-703.6 Pictograms
Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
Mounting Height and Location
The proposed rule specified a range of height of 48 to 60 inches for raised characters and a range of 40 to 60 inches for braille....
-
907.2.6 Group I
Exception: Manual fire alarm boxes in patient sleeping areas of Group I-1 and I-2 occupancies shall not be required at exits if located at all nurse’s control stations or other constantly...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Hager Companies Plastic International Symbol 364M
Plastic International Symbol 364M Material: - .0625'' (2 mm) thick plastic raised symbol Size: - 4" x 4" (102 mm x 102 mm) Fasteners: - Double-sided pressure sensitive...
-
Hager Companies Plastic International Symbol 364S
Plastic International Symbol 364S Material: - .0625'' (2 mm) thick plastic raised symbol Size: - 3" x 3" (102 mm x 102 mm) Fasteners: - Double-sided pressure sensitive...
-
11B-703.7 Symbols of accessibility
Symbols of accessibility, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
§ 38.25(c) Door height
For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift platform, or highest point of a ramp, shall be a minimum of 68...
