These regulations address technical requirements for lifts, including platform size, gate configurations for lifts with 90-degree egress, and required signage as follows: lift capacity...
Search Results "Directional Signage"
-
11B-410.8 Restriction sign
-
4.3.11.5 Identification
Signage shall also be installed at all inaccessible exits and where otherwise necessary to clearly indicate the direction to areas of rescue assistance....
-
§382.21 May carriers limit access to transportation on the basis that a passenger has a communicable disease or other medical condition?
[See subsections ...]
-
Openings [§302.3]
Openings [§302.3] Openings in ground and floor surfaces, such as grates, are limited in width to prevent passage of a ½” diameter sphere. Wheelchair casters can get wedged into...
-
10.3.1(3)
(3) Direct connections to commercial, retail, or residential facilities shall have an accessible route complying with 4.3 from the point of connection to boarding platforms and all transportation...
-
703.2.1 Depth
703.2.1 Depth. Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
11B-703.7.2 Symbols
[See subsections ...]
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
216 and 703 Signs
216 and 703 Signs The following types of signs, though they are not specifically subject to the 1991 Standards requirement for signs, will now be explicitly exempted by sections...
-
703.7 Symbols of Accessibility
703.7 Symbols of Accessibility. Symbols of accessibility shall comply with 703.7.
-
407.2.3 Hoistway Signs
407.2.3 Hoistway Signs. Signs at elevator hoistways shall comply with 407.2.3.
-
Temporary Signs
Comment. Comments requested clarification on what constitutes a "temporary" sign. Response. The Board has interpreted this reference, which is included in the original ADAAG, as...
-
11B-703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
11B-703.5.10 Format
Text shall be in a horizontal format.
-
11B-703.7 Symbols of accessibility
Symbols of accessibility shall comply with Section 11B-703.7. Advisory 11B-703.7 Symbols of accessibility. Symbols of accessibility, such as the International Symbol of...
-
11B-703.1.1.1 Plan review
Plans, specifications or other information indicating compliance with these regulations shall be submitted to the enforcing agency for review and approval.
-
407.2.3 Hoistway Signs
Signs at elevator hoistways shall comply with 407.2.3.
-
11B-407.2.3 Hoistway signs
Signs at elevator hoistways shall comply with Section 11B-407.2.3.
-
703.7 Symbols of Accessibility
Symbols of accessibility shall comply with 703.7.
-
R410 Visual Characters on Signs
R410 Visual Characters on Signs
-
703.2.1 Depth
Raised characters shall be 1/32 inch (0.8 mm) minimum above their background.
-
T215.2.1 Priority Seats
Priority seats shall be identified by signs informing other passengers to make the seats available for persons with disabilities. Signs at priority seats shall comply with T702.
-
T702.5 Stroke Thickness
Stroke thickness of the uppercase letter “I” shall be 10 percent minimum and 30 percent maximum of the height of the character.
-
11B-703.2.9 Format
Text shall be in a horizontal format.