covered under paragraph (c) of this section, you must provide a mechanism on your primary Web site for persons with disabilities to request disability accommodation services for future flights...
Search Results "Expected Maximum Flight Duration"
-
§382.43(d)
-
382.127 What procedures apply to the stowage of battery-powered mobility aids?
its counterpart in the existing rule, except to say that carriers may require a passenger wishing to check his or her device to check in an hour before the standard check-in time for the flight...
-
§ 382.43(d)
covered under paragraph (c) of this section, you must provide a mechanism on your primary Web site for persons with disabilities to request disability accommodation services for future flights...
-
Advance Notice for Optional Services and Equipment
[Secs. 382.33(b)(1)-(4)] If appropriate advance notice has been given and the requested service is available on that particular flight, you must ensure that the service or equipment...
-
Liability for Loss or Damage
Liability for Loss or Damage On domestic flights, the baggage liability limits do not apply for liability for loss, damage, or delay concerning wheelchairs or other assistive devices....
-
Non-Circular Cross Section: ADA Standard Section 609.2.2
Section 609.2.2 covers the current ADA Standards for non-circular grab bar cross sections.
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
11B-609.2.2 Non-circular cross section
Grab bars with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (102 mm) minimum and 4.8 inches (122 mm)...
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
Non-Circular Cross Sections: ADA Standard Section 505.7.2
Section 505.7.2 covers the current ADA Standards for the non-circular cross section of handrail gripping surfaces.
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of...
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
2.4.4.1. Repair Costs
Thus, it is expected that captioning devices will require occasional cleaning or minor maintenance by movie theater staff, but these costs are captured by the ongoing maintenance and administrative...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum....
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
Edges shall be eased or rounded at 1/16 inch (1.59 mm) minimum, or chamfered at 1/8 inch (3.2 mm) maximum....
-
Counter: ADA Standard Section 904.3.2
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
11B-809.10.8.7 Mirrors and towel bars
Where mirrors are provided the bottom edge of the reflective surface shall be 40 inches (1016 mm) maximum above the finish floor....
-
12. Portray successful people with disabilities in a balanced way, not as heroic or superhuman.
Stereotypes may raise false expectations that everyone with a disability is or should be an inspiration. People may be inspired by them just as they may be inspired by anyone else....
-
§ 37.42(d)(3)(iii)
FTA will provide a written communication to the railroad setting forth the reasons for the delay and an estimate of the additional time (not to exceed an additional 60 days) that FRA/FTA expect...