Combination refrigerators and freezers shall have at least 50 percent of the freezer space 54 inches (1372 mm) maximum above the finish floor or ground....
Search Results "Expected Maximum Flight Duration"
-
11B-804.6.6 Refrigerator/freezer
-
Selenia Performance Digital Mammography System
Image quality, clinical performance and technological advances — these are all advantages you have come to expect with a Selenia system....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum. [2010 ADA Standards] 903.3 Size....
-
11B-404.2.5 Thresholds
Thresholds, if provided at doorways, shall be ½ inch (12.7 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with Sections 11B-302 and 11B-303....
-
11B-903.3 Size
Benches shall have seats that are 48 inches (1219 mm) long minimum and 20 inches (508 mm) deep minimum and 24 inches (610 mm) deep maximum. [2010 ADA Standards] 903.3 Size....
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-904.4.1 Parallel approach
A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum above the finish floor shall be provided....
-
11B-604.4 Seats
The seat height of a water closet above the finish floor shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat....
-
11B-903.4 Back support
Back support shall be 48 inches (1219 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (457 mm) minimum above the seat...
-
8. Q: What steps should officers follow to communicate effectively with an individual who is blind or visually impaired?
Before taking photos or fingerprints, it is a good idea to describe the procedures in advance so that the individual will know what to expect....
-
§1630.2(j)(1)(ix)
The effects of an impairment lasting or expected to last fewer than six months can be substantially limiting within the meaning of this section....
-
G.7.i. - Are procurement actions to maintain existing legacy systems (that do not meet the technical provisions of the Access Board's standards) exempt from Section 508?
For example, if an agency is acquiring "patches" to fix minor software errors on a system that is not near the end of its life expectancy and software that meets the applicable technical...
-
a) Enforcement
Building Officials, regardless of how conscientious, knowledgeable and hard-working, cannot be expected to find and correct every Building Code shortcoming any more than traffic enforcement...
-
Enforcement
Building Officials, regardless of how conscientious, knowledgeable and hard-working, cannot be expected to find and correct every Building Code shortcoming any more than traffic enforcement...
-
You must not discriminate against qualified individuals with a disability
[Sec. 382.7(a)(3)] For example, if you choose to provide ground transportation and overnight accommodations to passengers because of a flight cancellation, you must ensure that the ground...
-
The carrier must designate priority stowage space for at least one wheelchair in the closet or other stowage area
advantage of the offer of the opportunity to pre-board may stow his or her wheelchair in this area with priority over other carry-on items brought onto the aircraft by other passengers and flight...
-
Character Spacing: ADA Standard Section 703.2.7
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-703.2.7 Character spacing
Where characters have rectangular cross sections, spacing between individual raised characters shall be 1/8 inch (3.2 mm) minimum and 4 times the raised character stroke width maximum....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
