Ramp Requirements [§405]
Search Results "Counter Slope"
Filters
Commonly Searched Documents
-
Ramp Requirements [§405]
-
404.2.4.4 Floor or Ground Surface
Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with 404.2.5 shall be permitted....
-
404.2.4.4 Floor or Ground Surface
Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with 404.2.5 shall be permitted....
-
Sales and Service Elements and Spaces
[See subsections ...]
-
404.2.4.4 Floor or Ground Surface
Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with 404.2.5 shall be permitted....
-
11B-404.2.4.4 Floor or ground surface
Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with Section 11B-404.2.5 shall be permitted....
-
11B-404.2.4.4 Floor or ground surface
Slopes not steeper than 1:48 shall be permitted. 2. Changes in level at thresholds complying with Section 11B-404.2.5 shall be permitted....
-
Additional Design Specifications for Requirement 1
The majority of commenters supported 8.33% as the slope criterion for the finished grade between covered multifamily dwellings and a public or common use facility....
-
7.2.2.1 Determining Impracticability
The combination of trail running slope (grade) and cross slope exceeds 1:2.5 (40 percent) for over a distance of 20 feet (6m). Limiting Factor 2. ...
-
EXHIBIT F ADA Maintenance Checklist
CHECK-OUT COUNTERS & TRANSACTION DRAWERS Interior check-out counters must be accessible to customers with disabilities....
-
1133A.7 Knee and toe space
1133A.7 Knee and toe space. Knee and toe space, when required by Section 1133A, shall comply with the following:
-
1133A.7, Item 2
2. The knee and toe space shall be 30 inches (762 mm) wide minimum, centered on the sink, countertop or appliance.
-
4.32.4* HEIGHT OF WORK SURFACES
The tops of tables and work surfaces shall be from 28 in to 34 in (710 mm to 865 mm) from the floor or ground.
-
1133A.7 Knee and toe space
Knee and toe space, when required by Section 1133A, shall comply with Section 1138A.2 and the following:
-
1133A.7, Item 2
2. The knee and toe space shall be 30 inches (762 mm) wide minimum, centered on the sink, countertop or appliance.
-
1133A.7 Knee and toe space
Knee and toe space, when required by Section 1133A, shall comply with Section 1138A.2 and the following: The knee and toe space shall be clear and unobstructed, or removable...
-
Accessible - Changes in Level
The maximum slope of a ramp in new construction shall be no greater than 1;12....
-
Curb Ramp Requirements [§406]
Curb Ramp Requirements [§406]
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Common Problems with Routes to Building Entrances
Common Problems with Routes to Building Entrances Ø The route has steps but no ramp. Ø Ramps are too steep or go too long without level rest areas; handrails are not...
-
6.7.1.2
A grade of up to 1:12 (8.33 percent) is permitted for up to 50 feet (15 m) of a beach access route. Resting intervals complying with section 2.3 shall be provided at distances of no...
-
TEST NO. 2 – SITE ANALYSIS TEST
Calculate the percentage of the total buildable area of the undisturbed site with a natural grade less than 10-percent slope....