Taking Measurements Sloped Surfaces One way to measure slope is to use a 24-inch level with leveling bubble and a tape measure....
Search Results "Counter Slope"
Commonly Searched Documents
- 
    
  
  Taking Measurements
  
 - 
    
  
  1007.2 Accessible Routes
  
A slope not steeper than 1:4 for a 4 inch (100 mm) maximum rise shall be permitted. 4. Ramp landing slopes specified by 405.7.1 shall be permitted to be 1:20 maximum. 5....
 - 
    
  
  1007.2 Accessible Routes
  
A slope not steeper than 1:4 for a 4 inch (100 mm) maximum rise shall be permitted. 4. Ramp landing slopes specified by 405.7.1 shall be permitted to be 1:20 maximum. 5....
 - 
    
  
  Rough Form and Foundation Inspection
  
building form elevations are set relative to site features (accessible routes, accessible parking, common and public use areas, and other site arrival points) to ensure correct accessible slopes...
 - 
    
  
  Rough Form and Foundation Inspection
  
building form elevations are set relative to site features (accessible routes, accessible parking, common and public use areas, and other site arrival points) to ensure correct accessible slopes...
 - 
    
  
  1007.2 Accessible Routes
  
A slope not steeper than 1:4 for a 4 inch (100 mm) maximum rise shall be permitted. 4. Ramp landing slopes specified by 405.7.1 shall be permitted to be 1:20 maximum. 5....
 - 
    
  
  11B-1007.2 Accessible routes
  
A slope not steeper than 1:4 for a 4 inch (102 mm) maximum rise shall be permitted. Ramp landing slopes specified by Section 11B-405.7.1 shall be permitted to be 1:20 maximum....
 - 
    
  
  11B-1007.2 Accessible routes
  
A slope not steeper than 1:4 for a 4 inch (102 mm) maximum rise shall be permitted. 4. ...
 - 
    
  
  11B-1007.2 Accessible routes
  
A slope not steeper than 1:4 for a 4 inch (102 mm) maximum rise shall be permitted. 4....
 - 
    
  
  Section B: Passenger Drop-Off Area
  
Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...
 - 
    
  
  1133A.4.1, Item 2
  
Base cabinets directly under the kitchen sink counter area and work surface shall be removable as required in Section 1133A.3....
 - 
    
  
  904.6 Security Glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  904.6 Security Glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  A4.5.1 GENERAL
  
Cross slopes on walks and ground or floor surfaces can cause considerable difficulty in propelling a wheelchair in a straight line....
 - 
    
  
  904.6 Security Glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  11B-904.6 Security glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  11B-904.6 Security glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  Resting Intervals [1018.8]
  
Resting intervals are required between beach access route segments any time the running slope exceeds 1:20 (5 percent). Resting intervals must be at least 60 by 60 inches....
 - 
    
  
  11B-904.6 Security glazing
  
Where counters or teller windows have security glazing to separate personnel from the public, a method to facilitate voice communication shall be provided....
 - 
    
  
  Golf Club Reach Range Area: ADA Standard Section 1007.3.2
  
where golf balls rest shall be within 36 inches (915 mm) maximum of a clear floor or ground space 36 inches (915 mm) wide minimum and 48 inches (1220 mm) long minimum having a running slope...
 - 
    
  
  11B-1007.3.2 Golf club reach range area
  
where golf balls rest shall be within 36 inches (914 mm) maximum of a clear floor or ground space 36 inches (914 mm) wide minimum and 48 inches (1219 mm) long minimum having a running slope...
 - 
    
  
  4. Assess During the Planning, Installation and Maintenance Phases
  
A digital level can be used to measure the running slope and cross slope....
 - 
    
  
  1009.1 General
  
Where provided, pool lifts, sloped entries, transfer walls, transfer systems, and pool stairs shall comply with 1009....
 - 
    
  
  1009.1 General
  
Where provided, pool lifts, sloped entries, transfer walls, transfer systems, and pool stairs shall comply with 1009....