(5) Slope. Ramps shall have the least slope practicable and shall not exceed 1:4 when deployed to ground level....
Search Results "Surface Slope"
-
§ 38.159(c)(5) Slope
-
General: ADA Standard Section 902.1
Dining surfaces and work surfaces shall comply with 902.2 and 902.3. EXCEPTION: Dining surfaces and work surfaces for children’s use shall be permitted to comply with 902.4....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
Cargill, Incorporated SafeLane® Surface Overlay CA-48
SafeLane® Surface Overlay CA-48 Commercial contractors, property managers and other private winter maintenance service providers require the same anti-skid, anti-icing and infrastructure...
-
Load and Unload Areas
Load and Unload Areas The floor or ground surface in the load and unload areas must have a slope not steeper than 1:48 and be stable, firm, and slip resistant....
-
1018.7.1 Maximum Running Slope and Segment Length
This section requires that the running slope of any segment of a beach access route not be steeper than 1:10 (10%)....
-
Surface
The top layer of ground on a recreation site, ORAR, trail, or beach access route.
-
1016.7.1 Maximum Running Slope and Segment Length
This section requires the running slope of any segment of an outdoor recreation access route to not be steeper than 1:10 (10%)....
-
226 and 902 Dining Surfaces and Work Surfaces
226 and 902 Dining Surfaces and Work Surfaces Section 226.1 of the 2010 Standards require that where dining surfaces are provided for the consumption of food or drink, at least five...
-
Accessible Exterior Surfaces Technical Article
Accessible Exterior Surfaces Technical Article Submitted by: Peter W. Axelson, M.S.M.E., A.T.P. Project Director Denise Chesney, M.E.B.M.E....
-
Ramp Requirements [§405]
Ramp Requirements [§405]
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
Observations and Results
Field Observations A wheelchair user on the beach path described the Vitri-Turf surface as "nice and firm" and the Soil-Sement surface as "kind of soft"( Fig. 12)....
-
Stable
A surface is not permanently affected by expected weather conditions and can sustain normal wear and tear from the expected use(s) of the area, between planned maintenance....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
-
INTRODUCTION
, the surface returns to its original condition; Firmness – the degree of surface resistance to deformation, especially by indentation or the movement of objects; and Slip-resistance...
-
TechniSoil G3® Pathway Liquid Polymer Stabilizer
This eco-friendly liquid polymer stabilizer for decomposed granite (DG) and crushed stone materials yields a durable, dust-free surface in only a few basic steps....
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
