Accessible Amusement Rides - A Summary of Accessibility Guidelines for Recreation Facilities
Load and Unload Areas
The floor or ground surface in the load and unload areas must have a slope not steeper than 1:48 and be stable, firm, and slip resistant.
Gaps
Where wheelchair spaces are provided on amusement rides, the floors of rides must be coordinated with the floors of the load and unload areas so that when the ride is at the load and unload position, the vertical differences between the two floors are within 5/8 inch and the horizontal gap is not more than 3 inches, under normal conditions.
However, if compliance with those measurements is not operationally or structurally feasible, operators may use bridge plates, ramps or other devices. They must comply with the Board’s vehicle guidelines (36 CFR 1192.83 (c).
User Comments/Questions
Add Comment/Question