16) Elevator hoistway floor designations and car controls ADAAG: Must have raised and brailled characters (§§4.10.5; 4.10.12)....
Search Results "Character Proportion (Raised)"
-
16) Elevator hoistway floor designations and car controls
-
Mounting Height and Location
Such signs are to be mounted so that the tactile elements (raised characters and braille) are between 48 to 60 inches high, measured to the baseline of characters. Comment....
-
Signage
Directional signage must meet requirements for character proportion [4.30.2] and height [4.30.3], sign finish and contrast [4.30.5] and should include the access symbol [4.30.7]....
-
1009.9 Signage
Signage shall comply with Chapter 11A, Section 1143A and Chapter 11B, Section 11B-703.5 as applicable, requirements for visual characters and include the International Symbol of Accessibility...
-
1009.9 Signage
Signage shall comply with Chapter 11A, Section 1143A and Chapter 11B, Section 11B-703.5, as applicable, requirements for visual characters and include the International Symbol of Accessibility...
-
1511.9 Raised-deck systems installed over a roof assembly
...
-
703.4.1 Raised Letter and Braille Signage Height
-
216 Signs
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1.3(16)(a)...
-
DSA Drawing 11B-406.6-2 Raised Island with No Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
DSA Drawing 11B-406.6-6 Raised Island with No Gutters (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
1117B.5.5, Item 2
California's standards for signage are more stringent than Section 4.30 of the ADA Standards for Accessible Design. 1117B.5.5 Raised characters and pictorial symbol signs. ...
-
Directional visual sign vs. room identification tactile sign
If that is how this sign is used, it would be classified as a "visual" sign, and would require conformance with the ADA Standards section 703.5, and would not require the raised lettering...
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
-
Figure 703.4.1 Height of Tactile Character Above Finish Floor or Ground – Drawing from the U.S. Access Board
-
Designing Sidewalks and Trails for Access, Part I of II: Review of Existing Guidelines and Practices
Source: U.S. Department of Transportation / Beneficial Designs, Inc. Document: 184 pages (1.67 MB PDF) Publication Date: July 1999 Sidewalks and trails serve as critical...
-
TACTILE SIGN
A sign containing raised characters and/or symbols and accompanying Braille....
-
Signage
Signs are subject to requirements in 4.30 for character proportion (4.30.2) and height (4.30.3) and sign finish and contrast (4.30.5)....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements....
-
H1
.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
