Grab bars shall not be required to be installed in a shower located in a bathing facility for a single occupant accessed only through a private office, and not for common use or public use...
Search Results "Alternate Roll-in Shower"
Commonly Searched Documents
-
11B-608.3 Grab bars
-
4.3.2 Seat Height
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...
- Inpro Corporation ENDURANT® Trench Drain Receptor
-
11B-224.1.2 Guest room doors and doorways
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
-
11B-224.1.2 Guest room doors and doorways
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
-
11B-224.1.2 Guest room doors and doorways
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
- Inpro ENDURANT® Velox™ Trench Receptor
-
610 Seats
[See subsections ...]
-
610 Seats
[See subsections ...]
-
610 Seats
610 Seats
-
11B-809.10.6.5 Thresholds
Where provided thresholds shall be 2 inches (51 mm) maximum in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from the...
-
11B-206.5.3 Transient lodging facilities
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
-
11B-206.5.3 Transient lodging facilities
Exception: Shower and sauna doors in guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall not be required to comply with Section 11B-404.2.3...
- Proline Drain
-
Clarification on Standard Roll-In Shower Compliance
Hope you are all doing well 🙂 I have a question regarding standard roll-in type showers. There's a drawing for this question at the bottom....
-
11B-609.3 Spacing
The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1½ inches (38 mm) minimum. 2. ...
-
11B-609.3 Spacing
The space between the grab bars and shower controls, shower fittings, and other grab bars above shall be permitted to be 1½ inches (38 mm) minimum. 2....
- Reese Enterprises, Inc. PERFEC MATv * Aluminum Hinge
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface,...
- American Specialties Stainless Steel Surface Mounted Paper Cup Dispenser 0002-SM
- American Standard Colony Soft Diverter & Personal Trim Kit
- ACO Premium Linear QuARTz Drain
-
Non-Positive Shut-off
It's not well-documented but I believe that it refers to a handheld valve that makes the shower head continue to dribble water when the main valve on the wall is left on. ...