Built-in seat in aromatherapy shower Soap dispenser (to prevent a fall from retrieving bar soap from the floor) Vertical and horizontal shower grab bars Hidden fold-down...
Search Results "Alternate Roll-in Shower"
Filters
Commonly Searched Documents
-
Bathroom Accommodating Reduced Ambulatory Mobility
-
2.1 General
ORARs shall connect the outdoor constructed features within each recreation site and shall connect to common use features such as toilets, showers, water spouts, trash or recycling receptacles...
-
4.3 Locker Room Barriers and Solutions
restroom Mirror over sink is too high Install a full-length mirror near the sink area Install a mirror over the sink that slants down to suit a shorter user Shower...
-
Issue: Effective Communication
In addition, city governments often fail to provide materials in alternate formats (Braille, large print, or audio cassettes) to individuals who are blind or have low vision....
-
Doors in Series and Gates in Series: ADA Standard Section 404.2.6
Section 404.2.6 covers the current ADA Standards for doors in series and gates in series.
-
Verify Framing
Maneuvering clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower...
-
Verify Framing
Maneuvering clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower...
-
Audio Visual Components
Make sure your registration process includes questions about specific accommodations registrants may need (please see a list of recommendations for your registration documents in...
-
24 CFR Part 8 Nondiscrimination on the Basis of Disability in Federally Assisted Programs and Activities - Notice: Instructions for use of alternative accessibility standard
ACTION: Instructions for use of alternative accessibility standard....
-
I. BACKGROUND AND JURISDICTION
. §36.304; provide alternative methods to make goods and services available where it is deemed not readily achievable to remove barriers, 42 U.S.C. §12182(b)(2)(A)(v), 28 C.F.R. §36.305;...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface,...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface,...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface,...
-
609.4 Position of Grab Bars
609.4 Position of Grab Bars. Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface,...
-
11B-609.4 Position of grab bars
11B-609.4 Position of grab bars. Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface,...
-
Doors in Series and Gates in Series: ADA Standard Section 404.3.4
Section 404.3.4 covers the current ADA Standards for doors in series and gates in series at automatic and power-assisted doors and gates.
-
Bobrick 24" Straight Grab Bar B-5806 x 24
24" (610mm) long, 1-1/4" (32mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Bobrick 24" Straight Grab Bar B-6806 x 24
24" (610mm) long, 1-1/2" (38mm) dia. tubing. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick, type 304...
-
Just Manufacturing 24" Stainless Steel Grab Bar
Type 304, 18 Gauge Stainless Steel. 24" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance 1-1/2" ADA...
-
Just Manufacturing 36" Stainless Steel Grab Bar
Type-304, 18 Gauge Stainless Steel 36" Length x 1-1/2" Diameter with concealed screws Brushed stainless finish Grab bar to wall distance...
-
Delta 1-1/2″ x 36″ ADA Grab Bar Concealed Mounting 40136-PS
Product Features and Benefits 36″ long, 1 1/2″ wide Concealed mounting - mounting hardware included 3″ diameter flanges 1 1/2″ wall clearance Limited Faucet and Finish...
-
Bobrick 36" Straight Grab Bar Peened B-6806.99 x 36
36" (915mm) long, 1-1/2" (38mm) dia. tubing, peened finish. Constructed of 18-gauge (1.2mm), type 304 satin-finish stainless steel tubing. Concealed mounting flange 1/8" (3mm) thick,...
