Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
Search Results "Sign Clear Floor Space"
Filters
Commonly Searched Documents
-
11B-226.2 Dispersion
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
608.2.3 Alternate Roll-In Type Shower Compartments
Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
11B-406.6 Islands
The clear width of the accessible route at islands shall be 60 inches (1524 mm) wide minimum. Where curb ramps are provided, they shall comply with Section 11B-406....
-
Security Bollards [7.4] and Security Devices
Security Bollards [7.4] and Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least...
-
4.8.4 LANDINGS
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
T504.1 General
Passenger access routes shall provide clearances that are sufficient to permit passengers using wheelchairs to move between wheelchair spaces and doorways that provide accessible boarding...
-
Side Approach
Sinks located in corners may not be fully within reach and the space to the rear of the side approach space cannot be reached....
-
Rockwood Manufacturing Company 604 Door Guard - Solid Cast Brass
Material: Solid Cast Brass Options: 1/8" clear plastic shim - order separately as 604 SHIM....
-
Cavity Sliders USA Inc. Wall Mount Track
Standard stocked finishes available: Clear or Bronze Anodized. Please inquire about custom colors....
-
Tile Tech Pavers® Porcelain Pavers™ Series
Until recently, porcelain pavers have mostly been used for traditional interior tiling purposes on both floors and walls....
-
Wilkinson Hi-Rise Trash Chute
The floor frames of the chute are typically equipped with sound isolator pads at each floor connection point to isolate the chute from the floor of the structure....
-
C.
Floor statements may well have been (and in modern times very probably were) delivered to an almost-empty chamber--or even inserted into the Congressional Record as a virtually invisible...
-
Sesame Retractable Stairs with Lift
The Sesame retracting stairs are the foundation of the Sesame System with the main objective of providing pedestrian and wheelchair access to a building all in one given space....
-
Kohler Bellwether® 60" x 32" Alcove Bath
60"L x 32"W x 15-1/2"H Constructed of KOHLER® Cast Iron 15" step-over threshold for easy entrance and exit Safeguard® slip-resistant surface Wide ledges for functional storage space...
-
Pressalit Care VALUE Support Arm Height Adjustable
The support arm can fold up when not in use or to make more space. Maximum Vertical Load: 264Lbs. (120kg)...
-
AbleRoad™ App
and medical conditions - including those who use a wheelchair or have other mobility, vision, hearing or cognitive disabilities - and their families and caregivers to review any public space...
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor. [ECTCR UFAS 4.25.3, Fig. 38, 4.23.9, 4.34.5.3(3)]...
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
1007.8.2 Directions
Directions for the use of the two-way communication system, instructions for summoning assistance via the two-way communication system and written identification of the specific story, floor...
-
405.9.2 Curb or Barrier
A curb or barrier shall be provided that prevents the passage of a 4 inch (100 mm) diameter sphere, where any portion of the sphere is within 4 inches (100 mm) of the finish floor or ground...
-
803.5 Coat Hooks and Shelves
Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground. [ECTCR UFAS 4.25.3, Fig. 38]...
