Each car shall automatically stop at a floor landing within a tolerance of ½ inch (13 mm) under rated loading to zero loading conditions....
Search Results "Rate of Change"
Filters
Commonly Searched Documents
-
409.4.4 Leveling
-
Alteration
A change to a building or facility that affects or could affect the usability of the building or facility or portion thereof....
-
§ 1194.23(k)(3)
Key repeat rate shall be adjustable to 2 seconds per character....
-
704.6 Structural stability
the height required by Section 704.11 and shall have sufficient structural stability such that it will remain in place for the duration of time indicated by the required fire-resistance rating...
-
2. Comparison of Proposed Rule with EN 301 549 Standard
each federal agency Annex C – Determination of Compliance Not within the scope of Section 508 or Section 255 Most similar to “303 Changes...
-
Principal features of the Option One guidelines that were not changed in the final Guidelines include the following:
[See subsections ...]
-
2.5.2.2 International Organization for Standardization (ISO) Standards
Potential hazards must be identified and then assigned ratings of the probability of occurrence of harm and of the severity of the consequences of that harm....
-
4.3.11.1(6)
Smoke barriers shall have a fire-resistive rating of not less than one hour and shall completely enclose the area or room....
-
Classes of Sleeping Accommodations [9.1.4]
For example, if a person requests an accessible room with one bed, but the only accessible room is one with two beds (usually let at a higher rate), leasing the larger room at the lower...
-
Qualitative/ Preference Based Questions
Qualitative/ Preference Based Questions Participants rated their enjoyment, ease of perceptual interpretation, and the strength and quality of their experience with full round models...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (13 mm) under rated loading to zero...
-
§ 37.5(g)
(g) An entity shall not refuse to serve an individual with a disability or require anything contrary to this part because its insurance company conditions coverage or rates on the absence...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
11B-407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of ½ inch (12.7 mm) under rated loading to...
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to...
-
§100.120(b)(2)
(2) Providing, failing to provide, or discouraging the receipt of loans or other financial assistance in a manner that discriminates in their denial rate or otherwise discriminates in their...
-
ASSESSMENT, PROGRESS, ACHIEVEMENT, AND GRADING
Assessment in PE and athletics should be planned and implemented so that progress and achievement can be rated accurately and fairly....
-
General: ADA Standard Section 222.1
Section 222.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dressing, fitting, and locker rooms.
-
Installation of Aggregate Surfaces at Bradford Woods
The trail bed shall be uniformly smooth and compacted to a rate of 90 percent. The rock shall be from a quarry and have angular fractured surfaces....
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to...
-
Lifting Capacity
Lifting Capacity Lifts must have the capability of supporting a minimum weight of 300 pounds and be capable of sustaining a static load that is at least 1.5 times the rated load....
-
R405.3.4 Clearance Reduction
Between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface, the knee clearance shall be permitted to reduce at a rate of 25 mm (1 in) in depth for each 150 mm (6 in) in height....
-
2.8 Effects of Luminance Contrast on Visual Detection and Conspicuity of Detectable Warnings
Higher luminance contrast is associated with improved rates of visual detection at close range and from longer distances....