The edges of reflecting pools shall be protected by railings, walls, warning curbs or detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.6....
Search Results "Head End Wall"
Filters
Commonly Searched Documents
-
11B-247.1.2.6 Reflecting pools
-
Benches
Benches must have a clear floor space positioned to allow persons using wheelchairs or other mobility devices to approach parallel to the short end of a bench seat....
-
Bobrick Double Robe Hook B-6727
Contoured 4" (100mm) wide bar forms hook at each end. Flange is 2" x 2" (50 x 50mm). Projects 2 5⁄16" (60mm) from wall....
-
11B-703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....
-
Surface Hazards: ADA Standard Section 609.5
Section 609.5 covers the current ADA Standards for the surfaces of grab bars and adjacent surfaces.
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-602.8 Depth
Wall- and post-mounted cantilevered drinking fountains shall be 18 inches (457 mm) minimum and 19 inches (483 mm) maximum in depth....
-
Bobrick Double Robe Hook B-672
Contoured 4" (100mm) wide bar forms hook at each end. Flange is 2" x 2" (50 x 50mm). Projects 2 5⁄16" (60mm) from wall....
-
2. Question: What is the minimum width needed for a level boarding railroad passenger station platform to meet the accessibility requirements of the Americans with Disabilities Act (ADA)?
For a conventional level boarding side passenger platform with a railing or a wall on the platform side opposite the track, the minimum platform width should be the sum of the maximum dimensions...
-
Willoughby Industries WODF-1WM Wall Mounted A.D.A. Stainless Steel Outdoor Drinking Fountain
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200 Revit Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers Floor to Wall
Requires the Premium User plan or above. (Login or upgrade your account!) -
11B-604.8.1.2 Doors
Doors shall be located in the front partition or in the side wall or partition farthest from the water closet....
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
Location and Size
The side rails can also be relocated along the table surface (from foot-end to head-end) for patients to position or reposition their bodies, and to maintain static positions....
-
EXHIBIT A Required Accessible Elements at QuikTrip Stores
with the ground surface; the handrails do not rotate within their fittings; and both handrails are mounted between 34 inches and 38 inches above the ramp surface and 1½ inches from the wall...
-
Behavioral Safety Products #TH870 Suicide Resistant Towel Hook - Front Mount
This eliminates any risk of ligature or impaling oneself, normally associated with standard towel hooks or ball stems that protrude directly from the wall....
-
11B-608.10 Soap dish
Where a soap dish is provided, it shall be located on the control wall at 40 inches (1016 mm) maximum above the shower floor, and within the reach limits from the seat....
-
R303 Alternate Pedestrian Access Routes (See R205) (Section-by-Section Analysis)
This section heading is included in Chapter R3 of the proposed guidelines to notify readers who were familiar with the 2005 draft of the proposed guidelines where to find the requirements...
-
Angled (Front-In) Parking
ADAAG's requirement for an access aisle on either side of a space (they can be shared by two spaces) is based on the assumption that drivers can head in or back in as needed....
-
Department of Justice method
While holding the uphill end of the level on the pavement, place a pencil under the other end and roll it toward the uphill end of the level until the horizontal air bubble shows level....
-
C. Establishing and Publishing Grievance Procedures
However, the Department of Justice has developed a model grievance procedure that is included at the end of this chapter....
